Engine Rebuild Kit

[90]

I have a 90 with a 3.5 carb V8. It smokes and has so much less power now then when I got it (8 years ago)

I want to rebuild the engine (and upgrade as much as is 'reasonable'). I have been looking to buy everything from one supplier so I get a compatible kit with minimum of hassle. I can gets parts from the UK, but is there anybody in Australia who would sell a complete set (more a collection of compatible upgrade parts than a kit as such)?

Recon I need pretty well everything but the block:
Heads, complete with valves and rocker assembly
Cams, tappets and lifters
Timing chain
Pistons, rings, gudgeons, con rods
crank, shells, bearings
plus all gaskets, bolts, core plugs and bits.


Cheers

[fernockulated]

Gday 90 first up try the recommended suppliers section further down the list of main forums,look up the section for W.A,after that try the links section(top of page)there may be some web sites in there catering for what you need,otherwise you may need to source your parts interstate,hope this helps some,Ferno:cool:

[disconut]

I have a 90 with a 3.5 carb V8. It smokes and has so much less power now then when I got it (8 years ago)

I want to rebuild the engine (and upgrade as much as is 'reasonable'). I have been looking to buy everything from one supplier so I get a compatible kit with minimum of hassle. I can gets parts from the UK, but is there anybody in Australia who would sell a complete set (more a collection of compatible upgrade parts than a kit as such)?

Recon I need pretty well everything but the block:
Heads, complete with valves and rocker assembly
Cams, tappets and lifters
Timing chain
Pistons, rings, gudgeons, con rods
crank, shells, bearings
plus all gaskets, bolts, core plugs and bits.


Cheers

I would be looking at a guy like Graeme Cooper.
Only seen his adverts, but is a landy specialist and has lots of go quick gear.

Trev.