Nanocom has returned Left Rear Sensor Output Too Low.

[Bohica]

The Nanocom has returned. [smilebigeye]The new screen is very responsive. SLAB fault is Left Rear Sensor Output Too Low. I guess I am up for a new hub.[bigsad]

[Tins]

The Nanocom has returned. [smilebigeye]The new screen is very responsive. SLAB fault is Left Rear Sensor Output Too Low. I guess I am up for a new hub.[bigsad]

Might be one of those at Norlane, if SH suits.

[Bohica]

Might be one of those at Norlane, if SH suits.

Worth a try.

[PhilipA]

First check the connector about 30CM from the wheel.
Mine did that years ago and a quick spray with electronic contact cleaner and hasn't come back since.'
Regards PhilipA

[Bohica]

First check the connector about 30CM from the wheel.
Mine did that years ago and a quick spray with electronic contact cleaner and hasn't come back since.'
Regards PhilipA

Surely that's only if it gets wet. Oh yeah! I'll look at it tomorrow!

[Pedro_The_Swift]

make sure the ABS ring count is correct on the new one...

[Bohica]

If I buy a new one it will be from Marion if he has them or an OEM one. I am fully aware of the teeth number problem.