3.9 fuel system:Missing Hose

[Bully]

Gday guys,
A little question and Im hoping it's an easy one:)

Model:s1 disco 3.9 v8 94
Mission: to find missing hose
Goal:to reunite this missing hose to the pressure regulator


Over the past couple of weeks I removed my injectors for them to get cleaned and to reseal my Plenum chamber as I suspected a air leak and a bloked injector(due to poor quality fuel my wife has been purchasing).

Because I havent worked on a engine in the last 16yrs I took photos and numbered certain items to remember where they went back.

But I was left with one slight problem:(

I cant find the hose that goes to the pressure regulator on the fuel rail.In the photo's I have the hose coming from the drivers side coming across the fire wall and hooks around to the pressure regulator.
Yes I lost it,I only took one end off

I am hoping someone may know what Im on about and might be able to point me in the right direction of where this hose comes from so I can trace it back


Cheers
Bully.

[Rovernaut]

That hose connects to the rear of the stepper motor body.
Go to the rear of the engine Driver's side, you'll see the stepper motor ( IAC), the stepper screws into a part on the Plenum and if you feel the rear of that part there is an air nipple which the hose connects too.

[Bully]

Thanks mate

It was starting to really bug me that I couldnt see where it went

So thanks again