Injector Coding

[d2dave]

I know there is a lot of info on this topic, on the net and here, which I have spent a lot of time reading.

I still can't get my head around how to do this, using Nanocom

I even managed to successfully do this back in 2016 when I put new injectors in.

Below is a link to the thread that got it sorted back then. Tried this and it did not work.

I have just finished installing a new second hand engine which I replaced the copper seals and recorded the injector codes numbers at the time.

I cannot for the life of me get Nanocom to save my changes. When on Nanocom if I hit the "INJ TYPE" button I get three different injector codes for the same injectors

I delete the original 5 letters in the boxes that have just letters and replace with the letters of my injector. I then go to the next page and click "write settings to ECU".

When I exit and come back the old injector codes are still there.

Does anyone have the simple answer as to how this is done?

This is an 03 Disco with green top injectors

Td5 Injector Codes Help (https://www.aulro.com/afvb/technical-chatter/236162-td5-injector-codes-help.html)

[sierrafery]

Let that "Inj type" thing untouched, insert all 5 codes, write settings then exit the whole menu with the red X, turn ignition off, wait 60 seconds, turn ign on and see then if they were saved or not

[d2dave]

It worked.

Thanks sierrafery. You're a legend.