Nanocom D4 Ride Height

[fourteen8]

Hi. Since I have nanocom that I use for my D2. Can I set the D4 ride height using nanocom after I get the unlock code for D4 or I need to get LLAMS?

Thanks

[DieselLSE]

You can test, adjust and reset the EAS system with the Nanocom but it is a diagnostic tool, not a permanently fixed height adjustment switch. For that you need Llams or some other similar kit. But first look at whether you really need it. I have found it really useful in the bush, particularly when you need to travel in off-road height a little quicker than the EAS will allow. Mushy snow over a muddy track, soft sand or mud where you need a bit of momentum, traversing a paddock, that sort of stuff. Also good to place in extended mode when you want to work under the car. But always use four axle stands as a safety backup.

[fourteen8]

I have a mate who uses this to control the height plus it’s Bluetooth so easy to install and use. It’s a Bluetooth diagnostic tools as well like nanocom.
Since I don’t have the unlock code for D4 on my nanocom I thought I ask here first otherwise if it’s not work I will get one like my mate use.

https://uploads.tapatalk-cdn.com/20220710/19c4b7b00c8dc65f2ea3769be6c1ec4f.jpg