RRT
20th September 2022, 06:55 AM
Having stripped a thread in the oh so soft solenoid block of the SLS, rather than the exorbitant price for a new one, simply got three (3) Push Fittings -1/4" is perfect 1/8" too big - and re thread the block to BSP. Of course if your push fittings are different then the thread has to match.
180966
180967
The collar on the existing air lines from the wabco have to be removed / trimmed minimally due to the short length of the existing line.
A distinct advantage is being able to use a Schrader line with a push fitting on the opposite end and then easily remove the lines and pump directly into the existing lines (4mm)
180966
180967
The collar on the existing air lines from the wabco have to be removed / trimmed minimally due to the short length of the existing line.
A distinct advantage is being able to use a Schrader line with a push fitting on the opposite end and then easily remove the lines and pump directly into the existing lines (4mm)