Steering wheel removal

[Lionel]

Hi All,


I'm having difficulty removing the steering wheel in my 2004 110 TD5 Xtreme.


No amount of banging etc, is having any effect, so I need to use a puller & would like to know whether anyone can tell me the size of the 2 threaded holes in the wheel boss which the puller has to be attached to.


They seem to be M6 size, but with a different thread pitch. Any information as to the correct size & thread type would be much appreciated.


Cheers,


Lionel

[Tombie]

Lionel

Put the nut back on loosely. Enough to stop wheel flying off.

Now arms under / behind the rim of the wheel and "bang bang bang" rapidly with your open plams

[Lionel]

Lionel

Put the nut back on loosely. Enough to stop wheel flying off.

Now arms under / behind the rim of the wheel and "bang bang bang" rapidly with your open plams

Tried all that! Can you help me with the original question? [wink11]

Cheers,

Lionel

[Tombie]

I reckon they are 1/4”

[Lionel]

I reckon they are 1/4”

Thanks! I'll give that a try - anything special about the thread?

Cheers,

Lionel

[JDNSW]

Pretty certain they are 1/4"UNF (if the same as older ones)