PDA

View Full Version : 3D printed parking sensor shield for Mitch Hitch



haydent
3rd December 2022, 05:40 PM
Stops the reverse parking sensors from being triggered by an aftermarket raised tow hitch, such as "Mitch Hitch"

Download my model here:
Land Rover Parking Sensor Shield - Discovery 3 4 Range Rover Sport by hayden-t - Thingiverse (https://www.thingiverse.com/thing:5676447)

182248

182249

gavinwibrow
3rd December 2022, 08:10 PM
Stops the reverse parking sensors from being triggered by an aftermarket raised tow hitch, such as "Mitch Hitch"

Download my model here:
Land Rover Parking Sensor Shield - Discovery 3 4 Range Rover Sport by hayden-t - Thingiverse (https://www.thingiverse.com/thing:5676447)

182248

182249



If your happy to on-sell, I'll happy contribute to a couple in whatever form makes you happy!

101RRS
3rd December 2022, 10:00 PM
These work perfectly well - available from Bunnings.

182258182259

gavinwibrow
3rd December 2022, 10:59 PM
These work perfectly well - available from Bunnings.

182258182259



That's what I have at the moment - just looking for a bit of bling!

haydent
4th December 2022, 06:25 AM
These work perfectly well - available from Bunnings.

well that is a easy idea.


If your happy to on-sell, I'll happy contribute to a couple in whatever form makes you happy!

If you put $10 into my paypal with ill send you 2 postage included.

https://www.paypal.com/paypalme/HThring (https://paypal.me/HThring?country.x=AU&locale.x=en_AU)

They can also be sanded smooth to remove the layer lines, as its ASA plastic, also this is UV/Sun/Temp resist

TonyC
4th December 2022, 01:53 PM
If the parking sensors "see" the tow bar, why don't they "see" whatever it Is that covers, or blinkers them?

Just curious, I've never had a car such high tech equipment.

Tony

haydent
4th December 2022, 02:55 PM
If the parking sensors "see" the tow bar, why don't they "see" whatever it Is that covers, or blinkers them?

Just curious, I've never had a car such high tech equipment.

Tony

the way I thought about my design was that it was reflecting the waves away from anything that would reflect them back to be measured.

with just covering it, maybe there is a minimum distance that if below it ignores ?

gavinwibrow
4th December 2022, 03:53 PM
well that is a easy idea.



If you put $10 into my paypal with ill send you 2 postage included.

Donate

(https://www.paypal.com/donate'token=vyH9S24FWLvycV8s_xj7gFKpNly6uUvNQX2M0 0Nh2NImVp_EZbdCCUcG2UA-YLm4VWNlv-GOBtR9YtW4)


Sorry, link doesn't work for me. Perhaps PM me a/c details for EFT?

haydent
4th December 2022, 04:10 PM
i fixed it, plz try again.

gavinwibrow
4th December 2022, 08:49 PM
i fixed it, plz try again.

From PayPal

Something's not right. This page doesn't exist.

haydent
5th December 2022, 05:24 AM
PayPal.Me (https://www.paypal.com/paypalme/HThring)