swarover
6th December 2022, 07:24 AM
Morning all,
A few questions about about replacing the transfer case on my D3. Background first.
Car is a March 2005 TDV6 S, manual gearbox with air suspension, 531,000 km.
Transfer case is making a noticeable but not bad sound that suggests bearing noise, my excellent indie repairer agrees, and Sunday's fluid change found metal in the old fluid, image attached.
Front diff recently rebuilt after bearing noise, done by the brilliant Max Deburgh who's the go-to man here in Perth WA for LR gearbox and diff rebuilds. He noticed that the diff was a different ratio than the usual auto car diffs he does.
I'm looking to get a second hand replacement transfer case and rebuild my original.
Questions therefore relate to the fitment of the S/H transfer case behind the manual gearbox before I rush out and buy anything: Are all D3 (TDV6; and 4.0 V6 and 4.4 V8 petrol) transfer cases the same (and D4 with 2.7, 3.0 and 5.0 P for that matter), in fitment and ratio? Are the auto and manual gearbox cases the same - will they fit both, and are they the same ratios?
Appreciate your advice, and thanks in anticipation. Nathan
A few questions about about replacing the transfer case on my D3. Background first.
Car is a March 2005 TDV6 S, manual gearbox with air suspension, 531,000 km.
Transfer case is making a noticeable but not bad sound that suggests bearing noise, my excellent indie repairer agrees, and Sunday's fluid change found metal in the old fluid, image attached.
Front diff recently rebuilt after bearing noise, done by the brilliant Max Deburgh who's the go-to man here in Perth WA for LR gearbox and diff rebuilds. He noticed that the diff was a different ratio than the usual auto car diffs he does.
I'm looking to get a second hand replacement transfer case and rebuild my original.
Questions therefore relate to the fitment of the S/H transfer case behind the manual gearbox before I rush out and buy anything: Are all D3 (TDV6; and 4.0 V6 and 4.4 V8 petrol) transfer cases the same (and D4 with 2.7, 3.0 and 5.0 P for that matter), in fitment and ratio? Are the auto and manual gearbox cases the same - will they fit both, and are they the same ratios?
Appreciate your advice, and thanks in anticipation. Nathan