Pennyless
11th December 2022, 02:20 PM
These are a generic brand , so no reflection on Roadsafe.
I know , dead simple put in crush tubes , insert bolts & tighten.
Except. Crush tubes are short and a very sloppy fit. Like 5mm undersize.
Will squash the chassis rails by aprox 3-4mm which seems excessive especially as the tubes are not a snug fit diameter wise.
Am I overthinking it or are these junk. [bigsad]
Thanks Pennyless
I know , dead simple put in crush tubes , insert bolts & tighten.
Except. Crush tubes are short and a very sloppy fit. Like 5mm undersize.
Will squash the chassis rails by aprox 3-4mm which seems excessive especially as the tubes are not a snug fit diameter wise.
Am I overthinking it or are these junk. [bigsad]
Thanks Pennyless