Build date 06/01. CDL Internals?

[Bohica]

Well, would it?

[PhilipA]

Depends when they started 2002 MY? But probably August so should have internals.
Has it got an EU3 engine or EU2?

Regards PhilipA

[Bohica]

I am guesing from the headlight, the UE2, I think the CDL, headlight, tail light and EU3 all came in at the same time.

[scarry]

With that sort of build date,the only way to check for sure is look at it.
It is easy to tell.

[shack]

I am guesing from the headlight, the UE2, I think the CDL, headlight, tail light and EU3 all came in at the same time.No they didn't.

I think the EU3 motor came before some other updates.

I think yours is an EU3.

You'll need to check for the CDL shaft in the top of the transfer case.

[Tins]

Just to throw another spanner, Ritter's and possibly others did upgrades to the lights...

[PhilipA]

I have a 2002 with old headlights and EU3 and it had no spigot on the transfer case for CDL.( until I changed the nose and bought OEM linkages)
Regards PhilipA

[discorevy]

They lost the cdl internals when the eu3 first came out ,until the facelift about 08/02.
6/01 should have eu2 and still have the internals, why not just check with a 10mm open end spanner?

[John_D4]

Another way to find out is to look at the product number on the transfer case. It’s visible without removing the TC. I can’t render the exact range, but it’s a more definite way of working out if it has the CDL internals.

[pop058]

Just to throw another spanner, Ritter's and possibly others did upgrades to the lights...

All the lights or just the headlights ??

[Tins]

All the lights or just the headlights ??

All. They made a fuss about having the rear indicators up high to be seen, and the reverse down low to be able to see. Can't say I disagree. I got mine in '09 and wanted to do it, rear only, but it wasn't cheap from them. Rear loom came with it. Don't know if I'd bother now.

[jwb]

Another way to find out is to look at the product number on the transfer case. It’s visible without removing the TC. I can’t render the exact range, but it’s a more definite way of working out if it has the CDL internals.


And just to make it even more confusing, I heard that they made some with the internals in the front output housing but no spigot!?

My 08/2002 build is EU3 and had no CDL internals or externals.
I was lucky enough to find the right parts from a 2a before they became gold plated.

[Tins]

And just to make it even more confusing, I heard that they made some with the internals in the front output housing but no spigot!?

My 08/2002 build is EU3 and had no CDL internals or externals.
I was lucky enough to find the right parts from a 2a before they became gold plated.

I reckon they just chucked in the stuff they had on the shelf to get rid of it. Must have looked silly when management decided to run with CDL again....