Hey there. Need some quick help with 2 codes.

[Funkmaster_Stan]

Hey guys. Need your help with the following error codes. The first one only appeared after the jeep was park for almost 2 weeks since I was traveling. Any insight would be greatly appreciated.

B1C62-14 (2F) Battery saver relay output circuit - General electrical failure - circuit short to ground or open

B1B93-3A (2F) Seat recline motor speed/ position sensor - Frequency modulation/pulse width modulation failure - incorrect, has too many pulses

[p38arover]

The first one only appeared after the jeep was park for almost 2 weeks since I was traveling.

Jeep?

This is a Land Rover forum.

[DiscoDB]

The OP said jeep not Jeep. There is a difference.

To the OP - which model year RRS do you have? The battery saver circuits differ from the D3 version to the D4 version of the RRS.

With B fault codes - safe to clear and then see if they reappear. Make sure your battery is well charged as low battery voltage can also cause random faults, but in this case also possible you have a real fault present.