Replacing rear sway bay links and rear passenger door lock mechanism.

[Bohica]

The parts are here. The links seem straight forward, the rattle gun or breaker bar ought to get them off.
The hard part for the lokh assembly I guess would be getting the door card off without breaking too many trim clips.
As I have not changed these before, anything to look out for?
A spanner to stop the top link bolt from spinning

[John_D4]

Watching with interest as I have to do my rear drivers door lock also

[Bohica]

I'll fire up the cameras for the repairs. YouTube fame and fortune here I come.

[John_D4]

Wait…I have to pay you? I own a LR, I can’t afford to pay you!

[RRT]

Just before pulling off each clip, say a small prayer. They are delicate but if you have a set of clips which are available it makes it less stressful. The lock itself though is pretty easy to get to and hence to get in and out.

[Bohica]

YouTube will pay me. $3 to $5 per 1000 ad views, so keep hitting that refresh button.

I have a box of various trim clips.

[Bohica]

Watching with interest as I have to do my rear drivers door lock also

The door card came out easily enough and none of the trip clips had a catastrophic failure. I have undone the Torx screws and removed the multiplug. I am not sure on how to remove the cable and rods as these are on the far side of the unit and out of reach of my fingers.
Do I take the door handle off?

Discovery 2 Rear Door Lock Change! (Jugs) - YouTube (https://www.youtube.com/watch?v=10QQOdtrAlU&t=4s)

[John_D4]

My bad. I didn’t realise that this thread is in the D2 section. I thought you had a D4. [emoji2369]