Pipe clip

[fourteen8]

Hi All

Is it possible to get this clip (attached photo) by itself or need to get the whole pipe? Thanks

https://uploads.tapatalk-cdn.com/20240319/3291a8f0a0b0c6311878556513c3393e.jpeg

[p38arover]

That doesn't look like a clip, it looks like a push-on coupling.

[fourteen8]

https://uploads.tapatalk-cdn.com/20240319/c9e0413d1e8c9a1105378d21ab5cd7a2.jpg
Yes this one here

[Blknight.aus]

yes, it is but to my knowledge only from dealers (good luck they will try to sell you the hose) or from euro sites. I used the phrase euro coolant couplings in google, switched to image view and sveral dozen varieties came up, about 30% were from parts websites.

Good luck, theres a lot that look very very similar out htere.

[Aussie Jeepster]

What about a parts dismantler/wrecker?

[Tombie]

If the vehicle is getting on, replace.... the rest of the rubber etc will be reaching EOL

[PerthDisco]

If the vehicle is getting on, replace.... the rest of the rubber etc will be reaching EOL

I recently priced the quick connector fuel hoses and fittings to the hpfp and fuel return / leak off side. Price is not too bad genuine around $100.

The $1400 are the two top heater matrix hoses to the firewall quick connections.

https://uploads.tapatalk-cdn.com/20240320/e88564bbd4558f86646e784a2c299906.jpg

[fourteen8]

If the vehicle is getting on, replace.... the rest of the rubber etc will be reaching EOL

What do you mean?

[fourteen8]

I recently priced the quick connector fuel hoses and fittings to the hpfp and fuel return / leak off side. Price is not too bad genuine around $100.

The $1400 are the two top heater matrix hoses to the firewall quick connections.

https://uploads.tapatalk-cdn.com/20240320/e88564bbd4558f86646e784a2c299906.jpg

Where do you get this from? Thanks

[Tins]

What do you mean?

End Of Life. Hoses soften, harden, or both. They will crack or split if disturbed, especially in an area of high heat, or oil contamination.

Nothing is forever.

[PerthDisco]

Where do you get this from? Thanks

Local Land Rover Dealer

There’s no aftermarket for these type of parts.

Parts relate to 2.7 engine

[fourteen8]

Local Land Rover Dealer

There’s no aftermarket for these type of parts.

Parts relate to 2.7 engine

Can you please tell me which part number on the quote for the clip that I need?

Thanks
Gus

[PerthDisco]

Can you please tell me which part number on the quote for the clip that I need?

Thanks
Gus

The ends come with the entire hose so for yours you either need to buy the injector leak off tube part (9K335 reference on the drawing) for the 3.0 or find the correct end fitting on eBay and try and connect it to the old hose but you’d need to match the size perfectly.

The part on the 2.7 is around $377 bought locally you’d have to ring your dealer for a price on the 3.0 or shop online.