Air spring woes.

[Bohica]

The LHS spring is losing air. Still on manual, it leaks from the 4mm 6mm adapter. I replaced the metal adapter wirh a plastic Uxcell adapter, it leaks faster. What other options are there for a 4mm 6mm adapter? There could be leaks in the hoses and the airbag, I'll swap those over tonight.

UPDATE

Well, I have gone to the car after work and there is no leak. When I filled the airbag this morning, I pushed the hoses in and rotated the connector. Maybe the hoses were not fully home, unlikely, or there was dust on the hose(s) In any case the problem has gone.

[d2dave]

Why do you have a 4 to 6mm adapter? Mine just has 4mm pipe throughout.

[RRT]

There are plastic prongs, I am replacing my three way push in at the pump with these for better fitment / reliablity - such as this

6mm To 4mm Straight Hose Pipe Tube Connector for Air Fuel Water | eBay (https://www.ebay.com.au/itm/304476513386?chn=ps&norover=1&mkevt=1&mkrid=705-159824-816807-4&mkcid=2&mkscid=101&itemid=304476513386&targetid=4585513252197727&device=c&mktype=&googleloc=&poi=&campaignid=554710916&mkgroupid=1310618971850270&rlsatarget=pla-4585513252197727&abcId=9326744&merchantid=136820&msclkid=aebcb366d23914dd1232d55c7712a232)

[Bohica]

Why do you have a 4 to 6mm adapter? Mine just has 4mm pipe throughout.

I am yet to install the compressor. These are filled via a 6mm push fit Schrader valve.
Those barbed adapters are what I was looking at.

[RRT]

Got the 4mm version of these and had to pull them apart and applied more than a few winds of teflon tape. What was there was virtually nil and they leaked more than a little.190079

They appear to be more than fine now with no bubbling coming when doused in a cup