1956 Battery case 86"

[AdamP]

Hi, does anyone have pictures of the battery case and support brackets for a Series 1 86"?
Pic is of the current arrangement, and I will have to remove it to repair the relay housing, so thought I'd put it back the way it should be.
Cheers Adam
190872

[101RRS]

I thought that is as it is - just need the hold down brackets.

garry

[123rover50]

I thought that is as it is - just need the hold down brackets.

garry


And the aircleaner bracket that is usually attached.

[Old Farang]

LAND ROVER SERIES BATTERY TRAY AIR FILTER MOUNT | eBay (https://www.ebay.co.uk/itm/256586536047'mkevt=1&mkcid=1&mkrid=710-53481-19255-0&campid=5338722076&customid=&toolid=10050)

LAND ROVER SERIES BATTERY TRAY AIR FILTER MOUNT

232550

[B.S.F.]

Drawing from the S1 54-58 parts catalogue.
.W.

[AdamP]

LAND ROVER SERIES BATTERY TRAY AIR FILTER MOUNT | eBay (https://www.ebay.co.uk/itm/256586536047'mkevt=1&mkcid=1&mkrid=710-53481-19255-0&campid=5338722076&customid=&toolid=10050)

LAND ROVER SERIES BATTERY TRAY AIR FILTER MOUNT

232550

Thanks for this, now I need to find one in Aus!! [bigsmile1]

[JDNSW]

I think they remained the same for most Series vehicles, and there must be thousands in usable condition lying round sheds and scrap heaps round the country!

[B.S.F.]

Don't be tempted to buy one for a S2 or 3, like the one on e-bay. They won't fit, you won't be able to close the bonnet. The 2/3 cleaners are taller.
You need one for a 54-58 model.
.W.

[Old Farang]

Well, if you find a good one it would not be very difficult to modify the hold down straps. Much easier than starting from scratch without any dimensions.