130 - dual cab trim questions.

[Lotz-A-Landies]

Progressing with my 6x6 Defender project.

The vehicle has been converted from single cab ute to dual cab off a 130. In the mean time I'm not sure I still have all the trim pieces. I seem to remember the front roof lining wraps under to form the trim at the top of the door. There is no angle like on the rear door head. Is that correct?

For the rear roof lining the single cab had a "headlining retainer" MWC9604 but the parts catalogue doesn't show similar for the headlining for the dual cab. Is there a trim piece above the rear windows that holds up the back of the headlining? Or, are there "Christmas tree" trim clips for the rear of the headlining? The parts catalogue is not clear in this area.

[Lotz-A-Landies]

Attached is an image of the rear trim in place (not fixed). At top of window there are two plates with holes 11" from centreline. There are no corresponding holes in rear headlining.

Is there an upper trim piece that should be inserted at top of rear window?

[shack]

Attached is an image of the rear trim in place (not fixed). At top of window there are two plates with holes 11" from centreline. There are no corresponding holes in rear headlining.

Is there an upper trim piece that should be inserted at top of rear window?

This any help?

https://uploads.tapatalk-cdn.com/20250413/80b1d27ea299005e65dfcfc7d5af08d4.jpghttps://uploads.tapatalk-cdn.com/20250413/9508faa1fb0912ce619c72adb9cee18d.jpghttps://uploads.tapatalk-cdn.com/20250413/efe197da4aeb1d9700a7999815aa85bc.jpg

[Lotz-A-Landies]

This any help?

<Images removed>

Yes lots of help!!! [biggrin]

I'll have to investigate the headlining more closely to see if the trimmer glued up the holes when re-lining.