Ace Pipe Joiner

[d2dave]

Whilst recently researching ACE pipe fix I came across some advice suggesting to not remove the pipe from the ACE block as it will forever leak.

The same advice suggested to cut the pipe and join with a high pressure 3/8 joiner.

It had a link to suitable joiners. I forgot to save the link and for the life of me cannot find the site or any where that sells such a thing.

Anyone know where to get these.

When my replacement pipe arrives it is only the front section, so I am going to have to do some joining.

[sierrafery]

Try https://www.ebay.com.au/itm/204962552036'srsltid=AfmBOopQpNr5WI6frwlPUu_IAjN3D 8dXZlnPZ4ULPLkYUyqNXIzL-XTV

[d2dave]

Try https://www.ebay.com.au/itm/204962552036'srsltid=AfmBOopQpNr5WI6frwlPUu_IAjN3D 8dXZlnPZ4ULPLkYUyqNXIzL-XTV

I can't find any specs on this regarding what pressure it can handle.

I looked at something similar before I started this thread and it was rated to 500 psi.

For ACE, 2000 psi is needed.

[sierrafery]

You are right, i had a brain fart with the brass ones, search for steel fittings cos those can handle above 3000psi for example these: Amazon.com (https://www.amazon.com/Metalwork-Stainless-Compression-Fitting-Tubing/dp/B07D1ZBMJV/ref=sr_1_11'dib=eyJ2IjoiMSJ9.pFGvDMTNJM2LZz1Ounjd6 cXgXVKqBIM7KbgcIoydnXxcfEaS20At3WPr37iDQNqoZpF3_Sh t7t1H-KRLRdG6D2SKLhjkPIPTds3FMQHq5GtvFV-jxfZL_TFkh1-gqoZBQYhxb5AcHdnbTtVVxquHabhWqSkxcY80s2rB83kKCe2Y9 5vGlg2kQC8l6FOhJSxVTdfj0jfPTRJPVk0bcYTkZhcfrKrstjX rvtDtnozK4Wk.07odAsV2zZcYSvL4iyXJrYa52U97sCoztO5O1 R6DDJs&dib_tag=se&keywords=compression%2Bfitting%2B3%2F8&qid=1752766102&sr=8-11&th=1) , 25MPa = 250 Bar(3625psi)