WABCO ECU to borrow?

[Bohica]

Does any one have a WABCO ECU I could borrow, it is the only thing left to try, apart from the wiring loom.

[AK83]

no luck with option B?

[Bohica]

Option B was a no go. The fault remains. I think this is the loom or the ECU, if a borrowed ECU resolves the fault, I'll buy one.

[DieselLSE]

Perhaps. You'll need to check the part number to see if it fits. In any event, you are welcome to borrow it. Probably keep it if it works.

[Bohica]

Thanks, that is a different model.

[Adarewyr]

Thanks, that is a different model.

Sorry I'm a bit slow but what unit are you after, have got a few engine ECU and a spare slabs computer kicking about if you'd be willing to cover the shipping to aus

[AK83]

Sorry I'm a bit slow but what unit are you after, have got a few engine ECU and a spare slabs computer kicking about if you'd be willing to cover the shipping to aus

Bohica has a D2a and needs a SLABS ECU.

Going from early posts ... I think he's after D2a SLABS unit.

[Adarewyr]

Bohica has a D2a and needs a SLABS ECU.

Going from early posts ... I think he's after D2a SLABS unit.

Right, I think I have a later model one but it's the one I'm using, my original ones a from a 2000my. Also googling I think maybe my upgrade to the 2003 slabs was pointless and only the last one gives you any real improvements! If someone can confirm then I could pop my "upgraded" one out, as it's just sitting loosely in the glovebox area with the original still screwed in

[shack]

Any Discovery 2 slabs controller will be fine to test with.

The controller pictured above is not a slabs unit, I don't know what it is.


I should also mention (although it's no doubt obvious) that WABCO make numerous ECUs for numerous brands of vehicle.