boost gauge works! i'll show ya! 24psiiiiii

[discowhite]

now i just need to feed it more FUEL!!!!!
if the boost stays this high i run out of gear box:o


http://www.youtube.com/watch?v=JuSNpCkaVaU


phil

[noddy]

.....don't worry about the gearbox, I would be more worried about the turbo!!!!:eek:

[Slunnie]

or the engine.

[George130]

Video wasn't available. 24psi? Thats huge. I have been told mine is up to 21 and even thats huge.

[DiscoTDI]

video wont work for me either:(

[sclarke]

Mine is running 15psi and thats plenty when the pump is tweeked corrently.

[rick130]

what engine ?
anything over about 16.5-17 psi in a Tdi and the head gaskests tend to fail sooner rather than later.

[Pedro_The_Swift]

boost is wonderfull!!!

speedo seems to be broken though---


oh yea forgot,, its a - - - - - -

:angel:

[discowhite]

what engine ?

TD5 90. im just playin around,,,,for now,,,,

vdo works for me???



oh yea forgot,, its a - - - - - -


EGT gauge:D

[Blknight.aus]

ummmmm if thats your exhaust gas temp gauge, what the hell are you doing to get it to swing so fast? Im guessing that you do know the difference between Nitrogen Oxide and Liquid nitrogen right?

More serioulsy Nice looking fit out but I have some questions...

1. How well can you see it from the normal driving position? (Ive got the Extreme and from my driving pos the Air con controls are a bit of blind mans bluff to use)

2. Any chances of some pics of the plumbing in the engine bay so I can follow the same?

3. For those of you who have em or are considering them, where would you be plumbing the pyrometer into the exhaust or would you recomend the ones with the sensor you just hose clamp onto the pipe?

[disconut]

now i just need to feed it more FUEL!!!!!
if the boost stays this high i run out of gear box:o


http://www.youtube.com/watch?v=JuSNpCkaVaU


phil

Any pics of your dash and gauge layout?

Trev.

[discowhite]

Any pics of your dash and gauge layout?
same as yours Trev.
http://www.dropshots.com/photos/120521/20060910/153333.jpg
http://www.dropshots.com/photos/120521/20060910/153410.jpg
http://www.dropshots.com/photos/120521/20060910/153434.jpg


ummmmm if thats your exhaust gas temp gauge, what the hell are you doing to get it to swing so fast?
no the gauge on the left is the EGT, and the one swinging wildly is the boost.
the EGT sensor is after the turbo, just for ease of fitment (yes i know it should be in the manifold yada yada yada!) see pic.
and the boost gauge fitting is welded into the turbo pipe between the turbo and intercooler. hard to see in the pic.
https://www.aulro.com/afvb/
http://www.dropshots.com/photos/120521/20060910/154057.jpg

[disconut]

Looks tidy. Have you considered shifting the fuel gauge for the boost gauge?

Trev.

[discowhite]

i can see it alright, it must be my height, not too tall not to short, just right.
i might move it one day, but there are other things to do first:)

cheers phil