Diff guards

[DRanged]

Ok

Prototype finished and is now at the fabrication shop to be jigged and fabricated.

They will be a h/duty front pan guard/ diff slider with a rear steering arm guard and mounting point for a rear s/damper, all in the 1 guard. It will also be metal sprayed for corrosion and impact resistance.

These guards will fit Classic R/R, D1, D2, and defender.
Will be manufacturing 20 at this stage and should have a price in a week or so.

All for now

Justin

[harry]

s'pose i should have one.

[DRanged]

Thats the spirit Harry. Keep it up:D :D

Regards Justin

[NOZ]

Sign me up for one. Dont suppose I could talk you into a rear bar ? Cut my rear 1/4 panels off tonight and it really needs a bar.

[Caveman]

I could be interested....depending on how much they end up being. :)

[LoadedDisco]

I agree Noz,
Justin a rear bar is in need and I will give you a hand to help where ever I can, we do need to construct a rear bar in the new year.

Wont be to hard I have seen both bars available to date.

[Zakros]

Justin,
Would it be possible to see your prototype diff guard this weekend at the driver training?

Cheers
Navron

[FenianEel]

Ok

Prototype finished and is now at the fabrication shop to be jigged and fabricated.

They will be a h/duty front pan guard/ diff slider with a rear steering arm guard and mounting point for a rear s/damper, all in the 1 guard. It will also be metal sprayed for corrosion and impact resistance.

These guards will fit Classic R/R, D1, D2, and defender.
Will be manufacturing 20 at this stage and should have a price in a week or so.

All for now

Justin

G'day mate,

OOOh definetely interested in these and some other goodies too!!!

Cheers

Matt

[MickG]

You already know how much I like to bolt new goodies to my truck:eek: Might have to open an account with Rangeering:D

1. EGT gauge
2. Boost Gauge
3. Steering guard
4. Rear recovery eyes
5. Rear side bar fenders
6. something else
7. one of those thingamijiggies
8. A hujamaflickerwagamacallit:eek:

Yep, almost beer o'clock:p

Aye, Mick

[FenianEel]

You already know how much I like to bolt new goodies to my truck:eek: Might have to open an account with Rangeering:D

1. EGT gauge
2. Boost Gauge
3. Steering guard
4. Rear recovery eyes
5. Rear side bar fenders
6. something else
7. one of those thingamijiggies
8. A hujamaflickerwagamacallit:eek:

Yep, almost beer o'clock:p

Aye, Mick

You forgot
9. Wigwam for a gooses' bridle

[MickG]

Also

10. T-Max winch;)

[LoadedDisco]

Also

10. T-Max winch;)

Since I'm running Air Lockers I have no need for a winch.
2 x diff guards will do.

[dungarover]

Justin, as discussed previously, I'll definatly grab one. I have destroyed too many steering dampners in my time on offending rocks.

When you have them up and running, will collect and pay.

Trav

[GuyG]

Hey Justin

I may also, price pending. Do you/anyone have anything to protect the handbrake drum on the ZF with LT230 as it was landing/sliding on the drum which broke my VC housing.

Cheers Guy

[dungarover]

Hey Justin

I may also, price pending. Do you/anyone have anything to protect the handbrake drum on the ZF with LT230 as it was landing/sliding on the drum which broke my VC housing.

Cheers Guy

I've never encounterd this issue even with my VC transfer on Aquarangie. You were just unlucky I guess, but nothing is impossible I guess.

The thickness of the handbrake drum it would be bloody hard to break and you know me, I've almost broken everything on a Rangie once :twisted: :twisted: :twisted:

Trav

[GuyG]

Hey Trav

The handbrake drum is fine - it didn't break, but the cast alloy casing of the vc unit did. The handbreak drum is the lowest point in the middle of the car, just trying to see if there is a slider/plate or something to stop breaking another housing.

[DRanged]

Hey Trav

The handbrake drum is fine - it didn't break, but the cast alloy casing of the vc unit did. The handbreak drum is the lowest point in the middle of the car, just trying to see if there is a slider/plate or something to stop breaking another housing.



Nothing that cant be made, I'll have a look.

Justin

[LoadedDisco]

I'll definatly grab one. I have destroyed too many steering dampners in my time on offending rocks.

Trav

Trav,
I had a look at Justin's proto type the other day and defiantly is the goods. Thick steel and protects everything around the front diff centre. Even if you caught the steering arm half a foot away from the diff guard it would only bent may be an inch before the diff guard would restrict it from going any further. Easy to fix an inch bend on the track.
I think you will like the look of them.

[DRanged]

OK

Production starts 03/11/06 for the first batch of 20. $165 inc gst will be the price for the guard and all the hardware required.They will be metal sprayed and finished in silver. Units can be supplied raw for $145 if required.

Regards Justin

[stikman]

Hey Justin,
Will you have one to see when i come down to grab my sliders? Dont have the extra dosh at the moment but let me know when you are down to a couple left out of the 20 and i'll raid the piggy bank, or the wifes bag.....:D

[DRanged]

Should have the prototype back in a couple of days, which will go on the front of the Rangie once I rebuild the diff.

Justin

[stikman]

Sweet, just let me know if you get 18 orders between now and when i come down....., if not we can discuss then. Speak Soon

[LoadedDisco]

Justin,
Please put me down for a front diff guard when there available. :cool:

[FenianEel]

Justin,
Please put me down for a front diff guard when there available. :cool:

Me too please :cool:

[DRanged]

No worries I,m starting a list.


Justin

[jsttry]

Interested in seeing pics

[DRanged]

Interested in seeing pics

Will post some pics next week when the prototype comes home from being the jig donor.

Justin

[weeds]

Will post some pics next week when the prototype comes home from being the jig donor.

Justin

hey justin - how do you post pics:)

[DRanged]

hey justin - how do you post pics:)



There's always one in the crowd:D