Fuel access panel

[easo]

1603 Blknight.aus showed me how to do this. Just need to get the pic bigger. The measuerments are there but the pic is too small. The panel its self is 200mm X 200mm.

[Mulgo]

Here are further details to do this access hole:

http://www.aulro.com/afvb/technical-chatter/30867-defender-td5-fuel-pump-access-hole.html#post444257

[Blknight.aus]

how are those hinges and the stop plate flange rivets holding up?

[Mulgo]

no issues - still going strong. just take the 2.5mm aluminium and stainless steel rivets.

if you will be in Cooma you can check it out.

cheers,
daniel

[easo]

Mines holding up well. Only had to replace the screw that holds the flap closed.

Easo