Disco 1 and Disco 2 Diff Centres - the same?

[LRHybrid100]

Anyone know for sure if D1 diff centres are interchangeable with D2 ones? and visa versa?

LRH

[Utemad]

I know that the D1 and D2 use the same airlockers up to a certain date in the D2 model. Even after that the front is still the same.

Don't know about the entire diff being the same though.

[dullbird]

not even going to comment not had a lot of luck in this department recently:eek: :eek: :eek: :eek:

[101RRS]

Disco 1s are 10 splines and Disco 1 updates are 24 spline so It will depend on which D1 you are comparing a D2 too.

As to the actual question - dunno but I assume the Updates and D2s are the same.

Garry

[Slunnie]

As far as I'm aware the 24 spline D1 diffs are interchangable with the D2 diffs, but the diff centres are slightly different in the cross shaft design.

[discowhite]

and the actuall diff case/pumpkin is larger on the D2!
cheers phil

[LRHybrid100]

Cheers guys,

Was only considering 24 spline - would never even think of using 10 spline.

So if they are interchangeable I could pull the Detroits out of my Rangie and put into a D2 for the big trip?

LRH

[dobbo]

Cheers guys,

Was only considering 24 spline - would never even think of using 10 spline.

So if they are interchangeable I could pull the Detroits out of my Rangie and put into a D2 for the big trip?

LRH


I don't know if that is as straight forward as it sounds, it just sounds too easy.

[lokka]

they are preety much the same except for the 10 and 24 spliners didnt know about he cros shaft differences but hay they still break the same way :D:D

[justinc]

They are interchangeable, but as slunnie says, the crossshafts are slightly different and the side gears are different. Same everywhere alse,

JC

[LRHybrid100]

so can I just pull them out of the Rangie and put them in a D2 or is there more to it?

LRH

[LoadedDisco]

I have D2 front and rear stock diff centers if anyone wants to buy them.