Coolant sensors AULRO order???

[LandyAndy]

Hi Guys
Im wondering how many of you are considering the coolant sensor advertised on here????
Is anybody in touch with the manufacturer?????
Im thinking that if we all put an AULRO order in together we may get a discount.
After an engine destruction this week Im keen to get 1 for the Disco and 1 for the Trytoos replacement.
Hands up who would is interested.
Andrew

[rangieman]

Yep 1 here if its cost effective:D

[mns488]

if you mean the "engine saver" you get a 10% AULRO discount. :)

[George130]

I already have the engine saver. Great little unit.:)

[Mick-Kelly]

I am interested, well it is on my to do list anyway.

[Outlaw]

yep interested in the engine saver if thats the one that measure a few different temps (not just coolant)

[Bytemrk]

Certainly interested in knowing more......

Mark

[zwitter]

I am interested in knowing the deal you can get. How about dealer wholesale price?

James

[ATH]

Hi Andy.
I'm just about to ring them about these as I put an order in and want to pay via CC.
I think it's just the low water alarm at $145 not the multi alarm type which is no doubt considerably more expensive.
What size discount are you looking for with a multiple order?
Alan.

[DiscoDan]

I'm in.

need one to save the new motor:)

[Dave110]

just came in to check the site while the silicone is drying on the sensor of the engine saver

those of you with a coolant alarm on your todo list my advise do it and do it now!

Our lucky escape started when I bought the engine saver in October 2006 received it the day after I ordered it and put it on the workshop bench and you all know how it is, time gets away from you ie. the P gaskets got a bit of a weep I'll get that fixed first it needs to have the fan take off to get to it and its due for a timing belt change in a few thou k's when I get it done I'll get the P gasket fixed, get it done mechanic says "Dave you realy need a coolant alarm fitted yada yada" yep I've got one I'll do a coolant change and fit the alarm no worries and then its Easter ( I know 6 months later) need to get away where will we go I Know! into some of the most remote country in east Gippsland and southern NSW have a great trip back to work on Monday drive into the car park pull up with people pointing at the front of the Defender get out and what the! coolant everywhere and nearly as much tears from me! open the expansion tank carefully and its about half what it should be phew! coolant still pouring out trace it to the waterpump seal, it must have just started to leak large amounts of coolant as I pulled up in the carpark. anyway new water pump fitted motor is fine and alarm being fitted as I type
moral of the story when you get a coolant alarm fit is straight away! not six months later!

[LandyAndy]

Hi Alan and others
My idea is to run this post for a few more days,get an idea of the numbers interested and ask what sort of deal they can do.
The one Im talkink about is the popup that appears at the top of the page from time to time.
Low coolant only,2 types,sensor in the hose or a plastic piece that fits in the hose.Next time I see the add I will link it.
Andrew

[Utemad]

The one Im talkink about is the popup that appears at the top of the page from time to time.
Low coolant only,2 types,sensor in the hose or a plastic piece that fits in the hose.Next time I see the add I will link it.
Andrew



Here you go.

http://www.enginesaver.com.au/

Prices as per website
http://www.enginesaver.com.au/orders.htm


I'd be interested given that my Disco seems to find new places to leak coolant every couple of months.

[mcrover]

count me in but it wont be for 2 months, Im payed buy the month and next month pays for tyres.

[crump]

I'd be up for one.

[Utemad]

I'm in.

need one to save the new motor:)

If I were you Danny I'd have it and be fitting it yesterday :p

[Signal1]

I'm interested, hopefully order can be done after 15/05 but majority rules.

[Andrewpv01]

I would be in for one - if not I will be ordering one very shortly anyway.

Andrew

[Rayngie]

Definately in for a low coolant one,

cheers,

Ray

[EchiDna]

any thoughts on mounting position for the in-line version? preceeding the waterpump maybe?

[DiscoDave]

It's on my list so if we can get a good deal then I'm in.

[Graz]

Count me in

[4bee]

Don't expect a discount on the full price, as part of that is postage & David doesn't seem to discount that, which is fair enough.

[DiscoDave]

I must admit I was wondering how it would work regarding postage to 50 different locations, but let's see how good our negotiator is...

[Utemad]

I must admit I was wondering how it would work regarding postage to 50 different locations, but let's see how good our negotiator is...

You could always cut down on work by doing group club orders. As in only sending one package per club. Sure not everyone is in a club but it would still cut down on a fair few I'd reckon. Especially with all the various LROCs.

[LandyAndy]

See what I can do.
Will contact them after the weekend.
Keep registering interest,the more numbers I have the better chance of us getting a discount.
Andrew

[Lucas]

Im interested depending on price.

[longreach]

count me in too. ,Ive being thinking of putting one in my defender for some time...........If the price is right:cool:

[chazza]

Me too Andy,
Cheers Chazza

[jrh1946]

Count me in too please!

JRH1946

[Jukebox]

Got one on the Disco and believe that its a must have.
And dealing with David was a pleasure.
$140 odd dollars compared to new motor no comparison.
Just do it and the best its made in Australia.
Thanks David

Regards Jukebox :):)

[Blknight.aus]

interested in it but life is way tooo hectic atm...

[Mikems]

Put me down for one.
Michael.

[dullbird]

maybe

[stephen]

I am also buying one soon, so If you can save a few bucks I am interested.

[Disco Rover]

I'll have one as well. Just replaced the dreaded split black tank having kept a very close watch due to its age and reputation. I reacted to the first signs of coolant loss and evidence of a leak on the outside of the expansion tank. Putting the old tank under airline pressure indicated a very large split fortunately not equalled by the coolant loss volume. Impending disaster averted.

[Bytemrk]

Count me in depending on final pricing..

Mark.

[Nanook]

Yes, let us know the deal.
Russ

[DaveS3]

I'd be interested.

Cheers,
Dave.

[matbor]

I already have the engine saver. Great little unit.:)

me too... worth the money, and the new one looks even easier to install.

[cazzz12000]

yeh I would be interested depending on price to zacc

[Tiny]

Yep, I'll be in.

[MW.TD5 Defender]

I would definitely be interested, depending on price

Thanks

Mal

[Disco123]

Count me in

[LandyAndy]

This is looking VERY GOOD
Lots of interest,I will keep it going till the end of the week.
No comitment to buy yet,just need a good idea how many are interested and see what the supplier is willing to come up with.
My first project as a moderator for "Suppliers offering discounts"
I hope all works out for all involved!!!
Andrew

[Tote]

Count me in as well please

[Rosco]

Yep. I'm interested.

Cheers

[Jerry 68]

Count me in for two as my father will need one.

Jerry68

[jik22]

Me too please

[Dave110HardTop]

Yep.. I'm in.
Less than $200 to prevent potential $7000? Oh yes.
Thanks
Dave

[CraigE]

Me too.
:cool:

[sschmez]

Thanx Andy

(Something about gates and bolting horses)

I'll put my hand up

Stevo

[4traction]

It looks good and I’m interested, ….and good on you for trying to organize this but come, somebody please help me in my ignorance. Two questions:

What alternative warning devices are there….. anybody?

And where’s every one planning to put these little LED thingies ( I have extremely limited technical knowledge….and/or ability)

[blitz]

Been thinking about getting one of these for about oh i dont know forever so count me in, but as i am going south for three weeks it would need to be at the end of May for me

Blythe

[LandyAndy]

Just had a quick tally up,we have interest for 40 units sofar,see what I can sort out.
Andrew

[matbor]

It looks good and I’m interested, ….and good on you for trying to organize this but come, somebody please help me in my ignorance. Two questions:

What alternative warning devices are there….. anybody?

And where’s every one planning to put these little LED thingies ( I have extremely limited technical knowledge….and/or ability)

Check out my install here, pretty easy.... New one is even easier....
http://www.aulro.com/afvb/showthread.php't=27874&page=5&highlight=engine+saver

[matbor]

Just had a quick tally up,we have interest for 40 units sofar,see what I can sort out.
Andrew


good luck getting all the money :wasntme: :D

[incisor]

have to agree,

make sure you get the money before you order......

[4traction]

Check out my install here, pretty easy.... New one is even easier....
http://www.aulro.com/afvb/showthread.php't=27874&page=5&highlight=engine+saver

Great, thanks matbor. So count me in too please!

[LandyAndy]

Hoping to do it on a "vendors offering AULRO members a discount",will see what the supplier has to offer.
Andrew

[Davy]

Most vehicles have a blank pulg on the dash somewhere.

[LandyAndy]

Hi Guys
GREAT NEWS
Ive spoken to David Jones,the Engine Saver man,he has offered AULRO members a substantial discount per engine saver.
PLEASE NOTE,he doesnt want the discount mentioned online as its a special deal for AULRO only,and doesnt want to upset his agents.
So the deal is,PM me,I will tell you the discount he is offering,I will give you your code number which you quote when ordering from his website.You will need to give me your "real name" you will be using when you order direct as I have to supply him with the names/codes.
ALSO please state which variant you wish to buy,the ESO 1200 (sensor into radiator hose) or ESS 1242 (inline version) See the website for more info.
http://www.enginesaver.com.au/
I will make a sticky post up with a link to the thread I will be placing in"Vendors offering a discount to AULRO members"
David recommends the inline sensor,mainly as it has a bigger sensor compared to the in hose version,plus fitting is so much easier.
Well done David,THANKYOU!!!!!
Get in and order people,the cost of these are nothing compared to overheated motor!!!!!
Andrew

[Signal1]

:arms: - Thanks for organising Andrew. Great idea and much appreciated. PM will be sent shortly.

[ATH]

Too late I've bought one already. Good work though Andy.
Alan.

[Rayngie]

Thanks for your efforts Andrew, very much appreciated,

PM sent,

Cheers,

Ray

[rar110]

Hi Andrew

thanks for organising.
Peter

[LandyAndy]

Hi Guys
The coolant offer will close on the 12th may,ie I will give out the codes till then.David Jones suggested the 12th,so time to get onto me for your code.
Sofar 22 AULROians have requested an order code.
Andrew

[Dave110HardTop]

Thanks Andy..

Can I make a suggestion? Can it be open till the 18th (friday)? I reakon a lot of us get paid mid month, and I know I need to order more than one (need to get one for SWMBO's car (suzuki sierra).

Otherwise it'll just on the plastic and make the damn banks better off. :-)

Once again, thanks for your efforts on this, it was perfect timing for me.

cheers

Dave

[LandyAndy]

Hi Dave
I think it will be OK,I will ask David to honour all promotional codes that were given out before closing day for 1 month,sound fair?? Grab an order code see what I can do. David seems a good bloke I dont think it will be a problem.
Andrew

[Cameron_Def]

Hey gang,

What version would be the best for a TD5 Defender ?


Thanks !!

Cameron

[Rosco]

Hey gang,

What version would be the best for a TD5 Defender ?


Thanks !!

Cameron

For some reason I feel more comfortable with the type that doesn't involve cutting the hose. Thoughts everyone ...........

Cheers

[Dave110HardTop]

Hi Dave
I think it will be OK,I will ask David to honour all promotional codes that were given out before closing day for 1 month,sound fair?? Grab an order code see what I can do. David seems a good bloke I dont think it will be a problem.
Andrew

Thats more than fair Andrew, thanks very much.

cheers

Dave

[LandyAndy]

Hi Guys
For ease of fitting,the inline for sure,less chance of it lealing and according to David jones,the guy who builds them the inline has a bigger sensor.
Most of you guys that have requested order codes have chosen the inline sensor.
David is happy to honour all codes for 30 days after the offer closes on Sat 12th may.
David is looking for agents for these units,if you are interested contact David via his website.
Thanks
Andrew

[Coastie]

Thanks LandyAndy

PM sent

Coastie

[jik22]

Mine arrived today, so I'll add that to the weekend jobs list. Full set of new coolant hoses coming from the UK too, when my SIL gets back from her hols. Just a shame a complete radiator wouldn't fit in her suitcase! :)

[rangieman]

A big thankyou to Andy for putting his neck on the block to do this for us:D
i ordered mine this morning:D

Thanks again Andy:cool:

[DiscoDan]

Thanks got mine today looks like my work is set for the long weekend, that and the pump tweaks:D

[jik22]

that and the pump tweaks:D

Now there's an idea, though I'd better get the EGT gauge fitted first, I think....

[LandyAndy]

Got my 2 inline kits yesterday,nice simple looking and a well put together kit.Got to find time to install.
DONT FORGET,OFFER CLOSES THIS SATURDAY!!!!!! GRAB YOUR ORDER CODES SOON.
Will be away this weekend,will forward final list to David sunday or monday nite!!!!
Andrew

[rangieman]

Yep i odered mine last friday and received it on monday wow that was quick

A big thankyou to Andy for organising this
A big thankyou to Dave for offering a great service + product and a discounted price

[Coastie]

It arrived today quick, efficient and a good discount.

Thanks to you Andy for organisation and Dave for your discounts and support.

Coastie