PDA

View Full Version : Tyres wanted


DRanged
12th June 2007, 07:15 PM
Ok guys.

I need a set of four 32 x 10.5 x 15 or similar. Dont care what tread pattern but must have enough tread for rego. Yes us NSW doods actually have to maintain our cars for our yearly pink slip;)

The 35" Creepies tend to freak out the inspection guys.

Free would be great but a donation can also be organised.

Got a set of real groovy "performance alloys" for them to go on. Would get a spot in the "Starsky & Hutch" movie with these babies on.

Justin
MickG
12th June 2007, 07:58 PM
Can't help but have you tried Brett.........he would surely have some tyres lying around to go with your vintage rims:D:D
DRanged
12th June 2007, 08:29 PM
Can't help but have you tried Brett.........he would surely have some tyres lying around to go with your vintage rims:D:D

Yep rang today but Brett was not there. But will try him tomorrow.

Justin
bolts
13th June 2007, 08:32 AM
Justin I have a set of Yoko's A/T's in the shed if you want to use them for the road worthy they came off my disco when i went to 33 muddies. They are 255/65/16, might get you through if you dont find what you are looking for.
Outlaw
13th June 2007, 08:41 AM
sorry can't help, had a look but only have a couple spare sets of 16" tyres... what about borrowing Nath's?
weeds
13th June 2007, 05:33 PM
I have four 7.50 x 16 on disco rims sitting in the garage....only problem they are in brizzy....just thinking you probably need 5
stikman
13th June 2007, 07:15 PM
I have four 7.50 x 16 on disco rims sitting in the garage....only problem they are in brizzy....just thinking you probably need 5

I have 1 so that would make five.

Will 32's get through inspection? as arn't standard 29s? Not sure what is acceptable but i know my 31s got through a Qld and NSW check without problems, but then again it would all depend on who was checking.
DRanged
13th June 2007, 08:24 PM
I have 1 so that would make five.

Will 32's get through inspection? as arn't standard 29s? Not sure what is acceptable but i know my 31s got through a Qld and NSW check without problems, but then again it would all depend on who was checking.

On my engineering report it was passed with 32" tyres. Must pull my finger out and get the 35's passed. One day:D

Justin