View Full Version : D110 - whats are the factory spring rates & lenghts?
LRHybrid100
13th June 2007, 08:21 PM
G'day Guys,
For a 2002 MY D110 - whats are the factory spring rates & lenghts?
I want to upgrade the fronts, so want to know what is factory first - want to get rid of that IFS look :mad:
LRH
rick130
14th June 2007, 11:10 AM
http://members.shaw.ca/jbarge/springinfo.html
Barra1
14th June 2007, 11:31 AM
I don't know the heights etc. but the front springs below levelled the vehicle perfectly.
R*NRC9449 - Spring-Front-LH
R*NRC9448 - Spring-Front-RH
These were suggested to me by a LROCV member - and they have worked a treat. The vehicle rides very well - (no winch fitted).
LRHybrid100
16th June 2007, 03:30 PM
Look like the D90 rears !!!
NRC9448 D90 Rear 15.31" 225Lbs 8 Coils blue/red
NRC9449 D90 Rear 14.80" 225Lbs 8 Coils yellow/white
LRH
westy
16th June 2007, 09:44 PM
I have a TD5 Extreme and put 1976 rangy rear springs in place of my front springs and this brought the vehicle perfectly level.
Ps I also have a winch fitted.
sclarke
24th June 2007, 05:57 PM
OK Bump Stop height on my Fender with a Winch and Bar and springs are the LR NRC9448 NRC9449
Measured today on a fairly flat surface it is about 100mm give or take 2mm
Steve
Powered by vBulletin® Version 4.2.4 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.