View Full Version : Max Height of Defender
Cameron_Def
18th June 2007, 10:01 PM
I have a new job, and I need to get in a 2m carpark..
I have always drawn the line at 2.1m car parks .. can I get in 2m ones ?
Thanks in adv!
PS - its stock ride height!
dmdigital
18th June 2007, 10:04 PM
If in doubt get a tape measure, but I know I wouldn't put mine under 2m height bar.
Bushie
18th June 2007, 10:22 PM
I have a new job, and I need to get in a 2m carpark..
I have always drawn the line at 2.1m car parks .. can I get in 2m ones ?
Thanks in adv!
PS - its stock ride height!
Doubt it
Mine is standard, and sits at 2020mm with a bit of gear in the back.
Would be too close for comfort with me anyway.
Martyn
Cameron_Def
18th June 2007, 11:50 PM
Doubt it
Mine is standard, and sits at 2020mm with a bit of gear in the back.
Would be too close for comfort with me anyway.
Martyn
Sigh ...
may have to get out zee spare car ...
OR .. Change Jobs!!!!
ladas
19th June 2007, 01:13 AM
Sigh ...
may have to get out zee spare car ...
OR .. Change Jobs!!!!
Looks like it, the owners manual states 2035
Ladas
JDNSW
19th June 2007, 06:44 AM
Sigh ...
may have to get out zee spare car ...
OR .. Change Jobs!!!!
Or get some smaller tyres - or check out exactly what the clearance is - they may have a safety margin of a few centimetres, as a lot of places only work in 10cm steps. See if you can talk to the building manager.
John
kaa45
19th June 2007, 08:43 AM
Do you really want to risk your roof on a centimetre or two? :eek:
Pedro_The_Swift
19th June 2007, 08:55 AM
and that assuming they built the thing "to plan"
and didnt add water pipes etc etc afterwoods:eek:
LRHybrid100
19th June 2007, 10:11 AM
airbag the rear end - this is what I am looking at :D
LRH
bluetongue
23rd June 2007, 09:03 AM
Cameron,
I've had the same problem in a couple of different car parks.... best thing is take it down with a tape measure and just try it out (slowly of course and with a mate or someone watching).
Make sure also that it's unladen - my fender will drop when I've got a heap of crap in the rear end.
In most cases, where a 2m clearance is stated mine has fit.
Cheers
Scott
LRHybrid100
23rd June 2007, 07:20 PM
I have just measured mine while on the level shed floor - 2050 at the back end.
Geez you can see why LR went back to putting ribs back on the external side of the roof!!!
LRH
Powered by vBulletin® Version 4.2.4 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.