tyre pressure on highyway

[Disco Steve]

what pressure do people run mudd tyres at on the highway?

[Ken]

36psi unloaded 40 to 44psi fully stacked

[Disco Steve]

how much vibration would you expect from muddies at 38psi?

[Bush65]

I run about 40 psi in bfg muddies and mickey t MTZ. No problem with vibrations.

[McDisco]

Steve

You really shouldnt get vibration as such but more noise due to the chunkier tread. If your getting vibration I will get a wheel balance and alignment...

Angus

[George130]

I ran 40-50 psi in my muds. Vibrations were not an issue. In the Disco vibrations would suggest either alignment, balance or you have mud messing with the balance.

[Dauntless]

I run 37 psi, in Bridgestone 604V's.

[JDNSW]

I run 37 psi, in Bridgestone 604V's.

That's the ones I have on the County - not sure I would call them mud tyres though! I run 35 unloaded, but up them to 40 for 110kph limit areas or very hot weather and add 10 front 20 rear fully loaded. Pretty much as placarded.

John

[lokka]

My maxxis buckshoots have a max pressure of 35psi so thats what i run em at and they are fine grip is good in all conditions even wet and noise isnt a problem :D:D:D:D:D