200TDI cylinder head

[Graz]

Can anyone suggest another source for Disco 200TDI cylinder head.

I just got an EM back from Paddocks advising they no longer stock them.

I suspect my head has gone, probably due a corrosion/fatigue crack.

Has anyone shoe horned a 300TDI into a 93 Disco?

I don't think any attempt to repair a cylinder head that is 14 years old and done 320.000 ks would be very successful

Regards

[Frenchie]

Silly question but would a 300Tdi head fit?

[rick130]

Silly question but would a 300Tdi head fit?
yeah, I thought they were the same head too.
Don't have my lil 'puter with me with the EPC to check.

<edit> whoops, my bad. Of course T/stat housing and injectors are totally different.

Maybe contact Turner Engineering in the UK, they seem to be prominent reconditioners over there about supplying a head ? http://turner-engineering.co.uk/</edit>

<extra edit> from Turners website....
due to unavailability of new cylinder heads, customer's own unit only

[sclarke]

They are avail in Oz.......
Cant remember where i saw one, but it was in melb.

Fitting a 300 in a Disco, Not that hard...... you will need a donor car as the g/box is different and the engine sits further forward than the 200.

Steve

[camel_landy]

...or just swap for a V8.

:p

M