are all S1 Disco body panels the same?

[feraldisco]

Hi - I know there was a change in the headlight/indicator set-up between 91-93 and 94-98 Discos, but does this mean that the front guards are different? I'm currently chasing up a front RHS guard for a 93 Disco and an interstate wrecker has a 97 guard for $175 which is cheap, but probably the wrong fit!

[p38arover]

Part Nos.:

Wing, Front RH

MWC6754 to VIN LA081991
ALR6682 from VIN MA081992 to MA163103 and MA501919 (MA = 1995)
ALR9878 from VIN TA163104 and TA501920 (TA = 1996)

Ron

[101RRS]

I assume they are different as the indicators are different in size between the two models.

Garry

[justinc]

I have just done a update headlamp (94 on) conversion on a 93, and can confirm the front of the guards are the same where the indicators fit, on the later one there is a small bracket rivetted on to support the under headlamp trim. I just re rivetted it to the early guard and all fits perfectly. I can not tell though if the guard is different anywhere else though....

JC

[feraldisco]

Part Nos.:

Wing, Front RH

MWC6754 to VIN LA081991
ALR6682 from VIN MA081992 to MA163103 and MA501919 (MA = 1995)
ALR9878 from VIN TA163104 and TA501920 (TA = 1996)

Ron


I'm a bit confused by this - this suggests that the 95 and 96 model front 'wings' are also different, as they have different part numbers - which surely can't be the case???

[blitz]

I have just done a update headlamp (94 on) conversion on a 93, and can confirm the front of the guards are the same where the indicators fit, on the later one there is a small bracket rivetted on to support the under headlamp trim. I just re rivetted it to the early guard and all fits perfectly. I can not tell though if the guard is different anywhere else though....

JC

I dont want to hijack the thread but Justin how hard was it to convert the headlights? and are they better than the smaller ones? my lights are buggered and I need to replace them was wondering if it is worth the effort?

Blythe