View Full Version : cork gasket - series 2a
Gromit68
5th November 2007, 02:27 PM
Hi everyone
The cork gasket (about the size of a 50c piece) that seals my glass fuel bowl is letting air into my diesel. I can see bubbles blowing into the diesel when it's idling in the driveway.
What's this part called and where do I get a new one?
cheers,
Alastair
4bee
5th November 2007, 03:20 PM
If you get some Neoprene impregnated gasket material, you can make your own quite easily.
Especially if you were any good at Kindy with the plastic scissors & paste stuff.:D
Really, it is a doddle.
JDNSW
5th November 2007, 03:55 PM
Alternatively, measure it and go see your local bearing supplier (or probably Repco etc). A synthetic rubber ring would work as well as the cork.
John
Blknight.aus
5th November 2007, 06:20 PM
Hi everyone
The cork gasket (about the size of a 50c piece) that seals my glass fuel bowl is letting air into my diesel. I can see bubbles blowing into the diesel when it's idling in the driveway.
What's this part called and where do I get a new one?
cheers,
Alastair
if its the one on the fuel pump its the fuel pump bowl gasket. just take the cork one to a decent seal place and they should be able to give you a new rubber one.
IF it looks a bit like a filter then its the sedimenter bowl and when you buy a service kit for it you should recieve a new seal.
Powered by vBulletin® Version 4.2.4 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.