D1 nudge bar pic's

[PAT303]

Can someone post a pic on how the D1 nudge bar mounts.I bought one second hand and would like to see the correct way it mounts up. Pat

[njz]

This might help.

5126

[JohnE]

Pat
i guess your talking about the in between bar, don't have diagrams, but have a couple of photos.
they may help.
from the middle looking towards the right hand rail
http://i178.photobucket.com/albums/w248/JohnE_1/HomePhotos247.jpg

side on from the front,
outside

http://i178.photobucket.com/albums/w248/JohnE_1/HomePhotos249.jpg


i'll put them on, if you want more just say so,
paul ( awabbit) has the same bar and he has only recently put his on.



john

[PAT303]

I'm missing the chassis brackets.Lucky it was cheap. Pat

[JohnE]

the brackets on mine are one piece and go from the bar back, you want more photos,
can go out and take a couple,



john

[awabbit6]

I sounds like your bar is non-genuine. Mine also has the mounts welded to the bar. (As per John's pics)
There are pics on the thread I started when fitting mine.

http://www.aulro.com/afvb/showthread.php't=39608

[Rovernaut]

Can someone post a pic on how the D1 nudge bar mounts.I bought one second hand and would like to see the correct way it mounts up. Pat
Pat I have a nudge bar fitted as per the pics, you will notice it is held on by 2 bolts each side, you will notice the bottom bolt hole is elongated.
On the bottom of the nudge bar are 2 eyelet holes.
I was using those to pull something off a track and found the nudgebar will slide on those bolt holes. Inother word it was pulling the bottom of the bar outwards which in turn brought the top of the bar deangerously close to my bonnet.
They are only for cosmetics and to hang a couple of driving lights off. Just a word of caution.

[JohnE]

Mr naut
thanks for reminding me I was going to send ladas a template of that fitting as his recovery hooks wouldn;t work with that setup.



john