Log in

View Full Version : Series II - firewall question



Grizzly_Adams
19th November 2007, 06:47 PM
G'day all,

I've been offered a firewall from a 1959 SWB Series II to replace the somewhat rusty one in my 1959 LWB Series II.

Are they a direct swap or will I need to modify the SWB Series II firewall to suit?

shorty943
19th November 2007, 06:49 PM
G'day all,

I've been offered a firewall from a 1959 SWB Series II to replace the somewhat rusty one in my 1959 LWB Series II.

Are they a direct swap or will I need to modify the SWB Series II firewall to suit?

The only problem I see, is if you have widened it at all.:D
Same firewall I'd reckon.

Lotz-A-Landies
19th November 2007, 07:04 PM
G'day all,

I've been offered a firewall from a 1959 SWB Series II to replace the somewhat rusty one in my 1959 LWB Series II.

Are they a direct swap or will I need to modify the SWB Series II firewall to suit?
Grizzly

You may have problems, unless it was a military, 1959 SWB were usually green while 1959 LWB were usually grey.

Diana :D:D:D:D:D:D:D

Lotz-A-Landies
19th November 2007, 07:06 PM
Apart from the colour - the difference only comes about with the introduction of the 6 cylinder and later in the 2a with the introduction of the single wiper motor.

Diana

Grizzly_Adams
19th November 2007, 07:15 PM
Grizzly

You may have problems, unless it was a military, 1959 SWB were usually green while 1959 LWB were usually grey.

Diana :D:D:D:D:D:D:D


:Rolling::p

Actually the replacement firewall is blue :eek:

Thanks for the feedback, much appreciated :)

Lotz-A-Landies
19th November 2007, 07:18 PM
... Actually the replacement firewall is blue :eek:
Unfortunately I don't have any experience with BLUE firewalls! :(:(:(

Diana

shorty943
19th November 2007, 10:08 PM
Unfortunately I don't have any experience with BLUE firewalls! :(:(:(

Diana

I must concur, the firewall in my S3 is RED:(, so I know nothing about fitting BLUE firewalls.:p