Series III seats

[p-a]

Does any one know where is the best place to get seats?

would it be better just to get some one to make them up or is there any that has them?


cheers,

[Panda]

Does any one know where is the best place to get seats?

would it be better just to get some one to make them up or is there any that has them?


cheers,

They are really hard to get. (Decent ones anyway). Tony's going to buy some canvas & do mine for me, as he has an industrial sewing machine. I'll post pictures when he's done it. Though may be awhile yet, after all the money I've spent on my baby for rego. I need a canvas top too, as the old one's rotten, so he's going to have a go at that too.:)

[shorty943]

As in, do you need new seat bases?
Or do you just need some re-upholstery done?

I've got a middle and left seat complete, in reasonable repair, now redundant due to a Bostrom 700 series drivers seat, and 2 place "crew" seat being fitted. And both to be fitted with nice sturdy canvas seat covers.
No drivers side seat, sorry, it had been replaced when I bought the truck.



They will never go back into mine, they will only take up space and deteriorate.
My mate goes back to work next week, so I can get them to any Smorgon Steel depot on the east coast for nix. Make an offer.

[Panda]

Have you got pics of them? I may be interested if the dollars are right.

[Disco Steve]

PM me Ive got some.

[shorty943]

Have you got pics of them? I may be interested if the dollars are right.

Tomorrow? It's dark out there now.:(


Everything for $100.

Everything between the firewall and the rear tub bulkhead.
Seat box, floor plates (t\case section as well), seats and backs.
Just no drivers seat.

I can no longer fit them, because of the new 5 speed truck gearbox and shifter tower, and I don't want to cut them up, I'm already sick of moving them, so they're to go to who ever can best use them.

[Panda]

Tomorrow? It's dark out there now.:(


Everything for $100.

Everything between the firewall and the rear tub bulkhead.
Seat box, floor plates (t\case section as well), seats and backs.
Just no drivers seat.

I can no longer fit them, because of the new 5 speed truck gearbox and shifter tower, and I don't want to cut them up, I'm already sick of moving them, so they're to go to who ever can best use them.

Shorty,

When you get a chance would be great. Sorry I didn't mean you had to go out in the dark & take them!

Thanks.

[shorty943]

Shorty,

When you get a chance would be great. Sorry I didn't mean you had to go out in the dark & take them!

Thanks.


:D Okey Dokey.

How about these. I turned the seats around in No. 3 to show the other sides.

All the rust colour is only geniune Northern desert red sand. You can even have that.
I've got plenty more where that came from.
And, as I can't refit any of this without cutting into it, I reckon it is all better of going to someone who is doing a "resto", rather than the mod work I am.

[Panda]

:D Okey Dokey.

How about these. I turned the seats around in No. 3 to show the other sides.

All the rust colour is only geniune Northern desert red sand. You can even have that.
I've got plenty more where that came from.
And, as I can't refit any of this without cutting into it, I reckon it is all better of going to someone who is doing a "resto", rather than the mod work I am.

They look pretty damn good to me. Where are you situate?

[shorty943]

I'm on the Murray at Tailem Bend in SA.

However my Landlord is a scrap truck driver, and goes up and down the east coast weekly. If you can get to a Smorgon Steel depot IYCC (in your Capital City). I reckon I can organise delivery.

Be a week or 2. He starts again next week, then picks up the new truck end of week, back on the east coast run week after that.

[lro11]

If they don't go I will give them a good home

[Panda]

I'm on the Murray at Tailem Bend in SA.

However my Landlord is a scrap truck driver, and goes up and down the east coast weekly. If you can get to a Smorgon Steel depot IYCC (in your Capital City). I reckon I can organise delivery.

Be a week or 2. He starts again next week, then picks up the new truck end of week, back on the east coast run week after that.

I'll find out & get back to you. Thanks.

[shorty943]

Your welcome.

[Panda]

Hi Shorty,

My apologies for the late reply.

Have found a Smorgon Steel depot at Narellan. If you are still interested in selling & can get your landlord to drop them off there, I'd still be interested in purchasing them. PM me details for payment etc.

Thanks,

Panda


I'm on the Murray at Tailem Bend in SA.

However my Landlord is a scrap truck driver, and goes up and down the east coast weekly. If you can get to a Smorgon Steel depot IYCC (in your Capital City). I reckon I can organise delivery.

Be a week or 2. He starts again next week, then picks up the new truck end of week, back on the east coast run week after that.

[shorty943]

Narellan, I'll see what I can do. He leaves today (Sunday) for Sydney, but there is no room on the truck for "soft" stuff this load.
Not with almost 70 ton of baled steel scrap in the back of the truck mate.
It will not arrive in the same shape it leaves.:(

And for some odd reason, my idea of just chucking onto his bed in the sleeper cab, wasn't all that well received.:p I figured he's not going to sleep and drive at the same time.:D

As for payment, well, Dave has a transfer case I need, we'll fix it up, plenty of time yet.:D

[Panda]

No worries, no rush. Just keep me posted.

Thanks.



Narellan, I'll see what I can do. He leaves today (Sunday) for Sydney, but there is no room on the truck for "soft" stuff this load.
Not with almost 70 ton of baled steel scrap in the back of the truck mate.
It will not arrive in the same shape it leaves.:(

And for some odd reason, my idea of just chucking onto his bed in the sleeper cab, wasn't all that well received.:p I figured he's not going to sleep and drive at the same time.:D

As for payment, well, Dave has a transfer case I need, we'll fix it up, plenty of time yet.:D

[LRO jr]

If they dont go ill be more then happy to take them off your hands for you.


LRO jr

[THE BOOGER]

bit late this thread is 2 years old but if your looking try land veh spares at silverdale talk to brian he had some a couple of weeks ago i got the bulkhead brackets from one that still had seats

[The ho har's]

now I know you are too young too have a huge bank balance.......but tell dad I bought mine from John Craddocks in the UK and they were half the price that an upholsterer can do them here delivered;)

cheers

Mrs hh:angel:

[rangie89]

Hi All
I have a set of seats from a series 2 in mint condition (covered in blue grey vinyl) and complete if anyone is interested.

Bret - Byford, Perth WA ph 0407 464 584 if interested.