PDA

View Full Version : Brush bar ? ex army


Lucas
13th January 2008, 06:51 AM
Hi,
I have the opportunity to buy a brush bar, I need some pics of what a proper ex mil bar looks like as I am not sure if its a homer or original.
It also has the 2 droppers that look like they fit up to the chassis does this sound right.
Mounting pics would be helpful.
Thanks.
Dinty
13th January 2008, 08:05 AM
G'day All, Have a look in the remlr.com website I'm certain you will find what your looking for cheers Dennis:wasntme:
Lucas
13th January 2008, 09:06 AM
Thanks Dennis, I had a look trough, the bar looks to be simmular.
Now for the mounting, are extra holes required in the bumper bar etc.
Fusion
13th January 2008, 10:38 PM
This is the brush bar off my 2a . Hope it helps :)
Phoenix
14th January 2008, 07:53 AM
THe Series 3 army bull bar mounts to the standard bumper through 6 holes and correspondingly large bolts!!

There are 2 stays/supports that go back to the chassis that attack to 2 right angle brackets that are welded to the chassis. These are reasonably substantial, but add a lot of strength to the bar.
Lucas
14th January 2008, 11:13 AM
Thanks for the replies wannalandy and Phoenix.
Would it be possible to get a pic of the stay bracket mounting point.

Thanks.
Phoenix
14th January 2008, 12:15 PM
I'll track down a photo and post it this arvo.
Fusion
14th January 2008, 07:19 PM
Hey Lucas , These are the stays on my 2a :)
Lotz-A-Landies
14th January 2008, 07:31 PM
Hey Lucas , These are the stays on my 2a :)
Mick

It's a bit hard to hide the Holden conversion isn't it?

http://www.aulro.com/afvb/attachments/series-3/6130d1200302361-brush-bar-ex-army-p1010001.jpg

Diana
Fusion
14th January 2008, 08:15 PM
Well it's not to hidden now is it :D:D:D:D. all will be fixed in good time . just want it on the road for now ;)
Phoenix
15th January 2008, 08:02 AM
Those stays are the same as on the series 3, so that was ease :lol2:
Lucas
15th January 2008, 07:29 PM
Thanks to wannalandy and Lotz-A-Landies for the pics.
The brackets must be a military specific thing and no such bracket exsists on my 109.
Looks like I will need to fabricate and weld to chassis.
Tommy
18th January 2008, 09:07 PM
Hi,
I have the opportunity to buy a brush bar, I need some pics of what a proper ex mil bar looks like as I am not sure if its a homer or original.
It also has the 2 droppers that look like they fit up to the chassis does this sound right.
Mounting pics would be helpful.
Thanks.

This is the ex army Series 3 brush bar Lucas.

https://www.aulro.com/afvb/images/imported/2008/01/300.jpg