LRHybrid100
16th January 2008, 06:06 PM
G'day Guys,
Recently installed my lightbar after taking a while to source the lights I wanted - ended up with 2 pairs of Hella FF75 lights:
I used 4mm twin cable to each of the lights all fed through the light bar and come down the side of the snorkel into the engine bay:
https://www.aulro.com/afvb/images/imported/2008/03/208.jpg
and the circuit breakers and relays were positioned inside the drivers guard:
https://www.aulro.com/afvb/images/imported/2008/01/370.jpg
I used 8 B&S (8mm) cable from the alternator +ve to the relays and also made an earthing spot using similar 8 B&S cable.
The relays are activated when the high beam is selected AND the switch on the dash is turned on.
LRH
Recently installed my lightbar after taking a while to source the lights I wanted - ended up with 2 pairs of Hella FF75 lights:
I used 4mm twin cable to each of the lights all fed through the light bar and come down the side of the snorkel into the engine bay:
https://www.aulro.com/afvb/images/imported/2008/03/208.jpg
and the circuit breakers and relays were positioned inside the drivers guard:
https://www.aulro.com/afvb/images/imported/2008/01/370.jpg
I used 8 B&S (8mm) cable from the alternator +ve to the relays and also made an earthing spot using similar 8 B&S cable.
The relays are activated when the high beam is selected AND the switch on the dash is turned on.
LRH