Members with diagnostic equipment [Archive] - Australian Land Rover Owners

LandyAndy

9th February 2008, 07:30 PM

Hi Guys
The purpose of this thread is to provide a list of members that have diagnostic equipment and are happy to help fellow AULROians out.
Please dont abuse the website by charging to do services that is in the realm of dealers/specialists.
IF IT IS REPORTED THAT PEOPLE ARE USING THEIR EQUIPMENT FOR COMMERCIAL GAIN THIS THREAD WILL BE DELETED.
Feel free to post what equipment you have and your area.
Thanks
Andrew

Update: As of Jan 2013 the most up-to-date listing of Members With Diagnostic Equipment can be found here: https://maps.google.com.au/maps/ms'msid=218400750788295972519.0004d2028daa79a1b492 9&msa=0

Slunnie

9th February 2008, 07:31 PM

Champion! Thanks LandyAndy!

Blknight.aus

9th February 2008, 08:05 PM

Im trying to get my t4 sorted Im currently having issues with the toshiba Im trying to get it to run from... couple of weeks it should be sorted...

as I got it free from the forum I was going to lay on 6 months worth of free usage with callouts providing I was going your way and since the missus loves garage sale shopping that covers most of brissy on a saturday.

Anyone turning up to my place would have free access all the time.

dmdigital

9th February 2008, 08:10 PM

Good one Andrew.

I'll kick it off and say that I'm in Gove (as a few of you know) and have RovacomLite. I've got licences for Lucas Td5 ECM and the Disco II Wabco SLABS and Valeo BCU.

I'm not a mechanic so don't see me for anything else, the main workshop in town is Gove Motors, and Mark there is a pretty decent block.

Jamo

10th February 2008, 10:00 PM

Blknight.aus

10th February 2008, 10:06 PM

LandyAndy

11th February 2008, 07:15 PM

Good stuff Dave.
Let us know what you find hiding in peoples "fault boxes"
Andrew

p38arover

11th February 2008, 08:35 PM

I've got equipment and can access most stuff but not all. I don't have a full complement of cables.

LandyAndy

11th February 2008, 08:43 PM

Thanks Ron
Andrew

Bigbjorn

12th February 2008, 09:03 AM

Well, I don't have a computerised all electronic car and hopefully never will again. I regard them as unsuitable for remote area use. Too prone to instantaneous catastrophic failure. My history with automotive electronics has not been a happy one. Hence my purchase of a County-Isuzu.

However, for those of you with petrol engines, I can offer a Blackhawk ignition analyser, dwell/tach. meters, multi-meters, compression testers, vacuum gauges. Laboratory grade optical tachometer. Ring compressors up to Cummins/Caterpillar size, torque wrenches, micrometers inside, outside and depth, vernier calipers to 12", dial gauges, dial test indicators, last word indicators, centre finders. Hand tools up to truck & earthmover size. Reamers, drills from No. 80 to 1" x MT3, counterbores. Turning capacity to 60" between centres. Mig and stick welders.

Pedro_The_Swift

12th February 2008, 09:27 AM

my t4 just passed its first round of tests....

http://www.aulro.com/afvb/computers/51278-t4-up.html

(more of a review of why it didnt work)

I'll be starting the testing phase and then its freebie clears to any that make their way my way.

I've got equipment and can access most stuff but not all. I don't have a full complement of cables.

can you get a list of cables from Dave?
or do you know which ones are missing?
are they one-off things?

p38arover

12th February 2008, 09:29 AM

can you get a list of cables from Dave?
or do you know which ones are missing?
are they one-off things?

I've given Dave my list of cables and accessories. I know he has a couple I don't have. They are short adaptor cables that plug into the diagnostic port, e.g the red one.

They can be bought but they aren't cheap!

foz.in.oz

13th February 2008, 09:25 AM

Bigbjorn

13th February 2008, 10:56 AM

Nice list of toys Brian, but where are you?

Inner Brisbane, south east. 10 minutes from the CBD when the traffic lights are friendly. Forgot a fair bit of stuff in my earlier list. Compressor, air tools, die grinders, surface and angle plates, trolley jacks, safe stands, usual hand held power tools, The normal tools of a journeyman fitter-machinist who spent much of his life in the motor and machinery industries, and as a truck owner and driver, car restorer, motor sport competitor, out of control collector.

garryc

17th February 2008, 12:02 PM

I've got Faultmate SV, but unfortunately can't help anyone out as it's locked to the VIN of my D3.

Besides, BlackBox is still working on the D3 systems so I can do little more than look at fault codes. Bit disappointing really, given the cash I forked out for it.:(

I have the Faultmate SV as well and agree with Jamo as to its limitations at this point. However if others have this device or the Rovacom for the D3 we could still discuss what we find when using it as the Black Box website doesn't respond too well to postings. :(

garryc

3rd March 2008, 03:23 PM

my t4 just passed its first round of tests....

http://www.aulro.com/afvb/computers/51278-t4-up.html

(more of a review of why it didnt work)

I'll be starting the testing phase and then its freebie clears to any that make their way my way.

Is that T4 you are using the LR T4 diagnostics(Testbook?), could use a copy if it can do the D3..

Blknight.aus

3rd March 2008, 08:07 PM

it can do the D3 and having a copy of the software is pointless if you dont have the hardware.

Timeless

18th March 2008, 09:52 AM

I now have a NANOCOM unit and am willing to help anyone that needs assistance. Might be a bit slow until I get used to unit but hey the more the better to help me understand it.

Pierre

3rd April 2008, 01:42 PM

In Mooroolbark, Victoria resides a Nanocom for TD5, Def Alarm, D2 SLABS. I will be slow until I'm a bit more proficient.

Email or pm will reach me Thu - Sun most weeks.

Pete

RichardK

6th May 2008, 09:14 PM

Blknight.aus

6th May 2008, 10:00 PM

p38arover

6th May 2008, 10:05 PM

T4 not so up...

Ive got a heap of the funny ones... What I cant do is talk to the ECU...

I dont have the cables for doing the Q setup. I can do an O (I might have that backwards)

Its the second simplest cable hookup in the lot and Im not set for it....

Damnation...

I can do Q (blue connector) - which is nearly everything on the P38A. I think I can do O as well.

I don't have the DTC0057A dongle for SRS.

Psimpson7

7th May 2008, 08:16 AM

I have a Nanocom for TD5 defender and Discovery2. Located Ormeau. North Gold Coast.

Pete.

Benzinvernichter

9th May 2008, 04:50 AM

Well,
I have a Rovacon Light and access to all what can be done by the OBDII connector (means NO direct/programming access to the BeCM) for early 4.0 litre P38
Feel free to to pass as I'm just around the corner in central Switzerland, in the middle of the swiss alps ;)
Peter

Pierre

9th May 2008, 03:08 PM

We'll drop in on the way through, Benzie. Make sure there's some Bundy in the place.

Cheers from Melbourne.

Pete

adm333

11th May 2008, 09:27 PM

I have the following useful P38 air suspension bits and pieces.....

- EAS fault read, unlock and recalibrate tools and custom cable
- Manual EAS controller (bypass ECU altogether)
- Ability to rebuild / renew valve block
- spare swap out valve block if needed

Could help save someone a few bucks.

Feel free to send me a PM

Dave

McDisco

17th May 2008, 08:06 PM

I just got my Nanocom...dont have a clue how to use it yet, but happy to help out anyone if they are in eastern Melbourne.

Cheers

Angus

Kalbee118

8th July 2008, 08:07 PM

I now have a NANOCOM unit and happy to assist anyone with code readings in the Gawler, Barossa and surrounds..........................when I get back from the Cape in late August! :D

LandyAndy

8th July 2008, 08:20 PM

I too have the Nanocom.
Willing to help out if need be but I would expect you to help AULRO with a subscription or similar :cool::cool::cool::cool::cool::cool::cool:
Andrew

5teve

8th July 2008, 10:24 PM

I too have the Nanocom.
Willing to help out if need be but I would expect you to help AULRO with a subscription or similar :cool::cool::cool::cool::cool::cool::cool:
Andrew

i'll join the club too... i have one.. as do loads now.. :) similar conditions as andy states!

Thanks

Steve

Ruslan

9th July 2008, 10:46 AM

TimNZ

14th July 2008, 07:30 PM

Hi all, I've recieved my new Scanguage II which plugs into the new TD4 Defender, so if you're in the Perth area and need a hand let me know :)

Tim

CraigE

15th July 2008, 11:17 PM

CraigE Esperance has Nanocom and prepared to help out where possible.

discowhite

16th July 2008, 05:32 AM

CraigE Esperance has Nanocom and prepared to help out where possible.

what he said but in Sydney.;)

cheers phil

Pedro_The_Swift

19th July 2008, 02:17 PM

Quarks

19th July 2008, 05:21 PM

Here ya go, Pedro:

AULRO Diagnostics Map (http://www.aulro.com/afvb/attachment.php?attachmentid=9636&stc=1&d=1216455526)

And I'm happy to help out where I can - Nanocom in Northern Sydney

:)
Geoff

CraigE

19th July 2008, 08:17 PM

Thats awesome. Lets hope it grows.
Cheers
CraigE:D:D

p38arover

19th July 2008, 09:14 PM

I have a T4 if you want to amend the map. I don't yet have the airbag dongle to allow me to reset SRS faults. I'll have to order that.

Quarks

21st July 2008, 04:07 PM

Thanks Ron, I've updated the map.

AULRO Diagnostics Map (http://www.aulro.com/afvb/attachment.php?attachmentid=9693&stc=1&d=1216623815)

:)
Geoff

harlie

26th July 2008, 10:55 AM

CraigE Esperance has Nanocom and prepared to help out where possible.

Me too - at Manly (east side Brisbane)

simonr23

26th July 2008, 11:04 AM

reynella in sthn adelaide too :)

bushrover

27th September 2008, 02:03 PM

Add me to the list too. Nanocom in Paraburdoo and Tom Price WA.

Rick

CowsGoMoo

27th September 2008, 07:06 PM

Better add me too. Ermington, Sydney

RonK

27th September 2008, 11:05 PM

Just purchased a Black Box EAS Kicker I only have the plug for Classic. It works okay cleared faults it also has extra soft ware for hight changes.

gruntfuttock

28th September 2008, 08:10 AM

You can put me on the list with a nanocom,

Rutherglen Vic

Captain_Rightfoot

28th September 2008, 08:14 AM

Add me in too. Nanocom in Brisbane inner North.

Quarks

29th September 2008, 06:33 PM

Ok, a few more so I've updated the map.

It can now be found in the files section of the site.
Also direct link: AULROian Electronic Diagnostics Map (http://www.aulro.com/afvb/local_links.php?action=jump&id=65&catid=3) (609KB )

:)
Geoff

stevo

4th October 2008, 07:39 AM

I have a rovacomlite and after my road trip to perth next week will be living in brisbane around the clayfield area,

I will have the rovacom lite on board and heading north to Cairns before heading across to Alice Springs and Kalgoorlie.

McDisco

4th October 2008, 05:42 PM

Geoff

Awesome idea putting this all on a map. That way people could either download it and print it off before heading off on a trip. Then if they get in trouble all they need to do is put the word out via a few pms.

Personally, I am happy to help anyone clear faults if they are anywhere near me...

Angus

feral

4th October 2008, 11:05 PM

Thanks Angus,

I have car...will travel :D

PM sent.

LOVEMYRANGIE

6th October 2008, 04:39 PM

OK, here is Nanocom in Mount Gambier now, so reading/clearing faults service available, welcome :)

Just an idea, what if we make a list with geographic location of the AULRO diagnostic points? Let say I'm traveling from A to B and know where I can get diagnostic help.

Cheers,
Ruslan

Good idea! Just saw the location map of who has what.
If ppl want to PM me with their GPS co-ords and details, I can put together a waypoint file or set them up as POI's for GPS use.
POI's would be done with Garmin POI software, so it may not suit everything, however waypoints would be a gpx so usable be everyone.

If those of you who have gear havent got a GPS to get your co ords, just use Google Earth to find where you are and cut & paste the details from there.
Cheers

Andrew.

Captain_Rightfoot

6th October 2008, 04:47 PM

I did my first "three amigos" reset on the weekend. It was easy after I'd remembered how to drive the thing!

Trippo

19th October 2008, 07:33 PM

Have nanocom in Melton Vic.
Have done hardware upgrade (10Mhz xtal) and runninng firmware ver 2.02.
Latest software on laptop.
Regards Chris

Bytemrk

4th November 2008, 10:48 PM

Picked up my Nanocom end of last week - great little gizmo.

So better put me on the list. Mitcham Victoria

Mark

5teve

5th November 2008, 08:34 AM

should of put this on ages ago..

nanocom in Kinross, WA

already used several times and justified its cost with alarm / immobiliser issues! (nothing to do with the car i'll add.. :) )

Thanks

Steve

Quarks

5th November 2008, 11:24 AM

i'll join the club too... i have one.. as do loads now.. :) similar conditions as andy states!

Thanks

Steve

should of put this on ages ago..

nanocom in Kinross, WA

already used several times and justified its cost with alarm / immobiliser issues! (nothing to do with the car i'll add.. :) )

Thanks

Steve

Hey Steve - you did! :p
And you're on the map too! :D

(Which I should update again sometime soon, but don't hold your breath;))

5teve

5th November 2008, 02:28 PM

bah... we need a section where we can hide.. :)

Thanks mate!

Steve

bushrover

14th November 2008, 08:25 PM

Add me to the list too. Nanocom in Paraburdoo and Tom Price WA.

Rick I've moved, now in Newman WA.

Bundalene

14th November 2008, 08:34 PM

Put us on the map as well. We have a Snap On analyser with a number of keys including Series2 Disco / Defender. - Horsley Park Western Sydney.

Erich

mumbo

14th November 2008, 08:51 PM

Picked up my Nanocom end of last week - great little gizmo.

So better put me on the list. Mitcham Victoria

Mark

Hi Mark,

Would this gizmo help in identifying a probable electrical/spark glitch leading to rough idle on gas? I'm not up with what they do exactly but am not far away from Mitcham.
Thanks
Loyd

LandyAndy

15th November 2008, 05:01 PM

Hi Loyd
The Nanocom is a TD5 specific item.Bundalenes Snap On unit may talk to the V8???
Andrew

101RRS

15th November 2008, 07:26 PM

Is there anyone on the forum in Canberra who can clear codes - L series diesel freelander - should be the same as a TD5.

Thanks

Garry

LandyAndy

15th November 2008, 08:27 PM

Hi Gary
I wonder if you can get somebody to connect a Nanocom up just to see if it can do it????
Andrew

101RRS

15th November 2008, 08:51 PM

Hi Gary
I wonder if you can get somebody to connect a Nanocom up just to see if it can do it????
Andrew

I am open to offers:).

I know Scanguage works on it which also works on a TD5.

Garry

bruiser69

20th November 2008, 10:15 AM

I am open to offers:).

I know Scanguage works on it which also works on a TD5.

Garry

Hi Garry,

Have you actually tried Scanguage with DiscoTD5?
I have seen posts that say Scanguage only works with V8 model & will not read or clear error codes on TD5.

Cheers.B

Quarks

20th November 2008, 02:14 PM

Ok, well, that takes it to 27 on the map now. :thumbsup:

You can download the latest version here: AULROian Electronic Diagnostics Map (http://www.aulro.com/afvb/local_links.php?action=jump&id=68&catid=3)

Although I could make the location points used in the map available (as it's all done in GIS), I'd rather not, since the data quality is poor once you start zooming in - eg. for those locations not on the 1:2.5M map, it's me taking pot shots of "yeah, about 5km north-ish of wherever". It's really more a case of "this is roughly where the town is", rather than a geocoded street address:eek:. The other consideration is that some of us on the map would generally prefer be contacted before someone drops by ;).

[Mods - you might like to remove the previous map from the files section to avoid confusion ;)]

:)
Geoff

101RRS

20th November 2008, 02:37 PM

Hi Garry,

Have you actually tried Scanguage with DiscoTD5?
I have seen posts that say Scanguage only works with V8 model & will not read or clear error codes on TD5.

Cheers.B

The simple answer is no. I was looking at getting a scanguage to use on my Freelander and contacted the makers in the US and two distributors in Aust - I was assured by all of them that Scanguage II worked on both the Freelander and TD5 as they were OBDII compliant.

This thread also indicates Scanguage II works on TD5 Defender so should not be an issue on the Disco.
http://www.aulro.com/afvb/electronic-diagnostics/59654-scan-gauge.html

Garry

peter5111

21st December 2008, 04:30 PM

This thread also indicates Scanguage II works on TD5 Defender so should not be an issue on the Disco.
http://www.aulro.com/afvb/electronic-diagnostics/59654-scan-gauge.html
Garry

No go on a 99 TD5 Disco.

But happy to make my SG2 available for anybody who has an ECU that will talk to it. Located in Blakeview, SA

crossy999

22nd December 2008, 01:37 PM

Here's another one - Nanocom for D2. Dee Why, Sydney. happy to help out if I can.

andrew e

27th December 2008, 08:24 PM

Hi Loyd
The Nanocom is a TD5 specific item.Bundalenes Snap On unit may talk to the V8???
Andrew

I it does v8 D2s and post 99 p38s, but doesnt do the pre 99 Gems p38s and D1s until i spend another 495 on an upgrade card. Even then it only does the engine side, no abs srs etc. It does everything else though, from a X5 to a commodore.

Andy

Pedro_The_Swift

27th December 2008, 08:26 PM

isnt the Snap-on a bit more expensive??:eek:

mumbo

27th December 2008, 08:58 PM

Just bought a ScanGauge 2. So far its a bit of fun but not sure how powerful. It definitely shows up codes (mostly injectors)when my Thor V8 is running on gas(lpg). They are then cleared and don't show up when on petrol.
Happy to play with it on anyone's truck locally. Balwyn Nth.

Cheers

Stead

1st January 2009, 07:56 PM

I have a nanocom and am in Albury N.S.W if anyone needs a bit of help I am happy to assist. I am not a mechanic and don't have much of an idea when it comes to cars.

richaur

14th February 2009, 08:30 PM

Hi all,

Anybody with a Nanocom in Newcastle area. I keen to get rid of the auto central locking and the double unlock on entry.

Cheers

p38arover

14th February 2009, 09:17 PM

Just bought a ScanGauge 2. So far its a bit of fun but not sure how powerful. It definitely shows up codes (mostly injectors)when my Thor V8 is running on gas(lpg). They are then cleared and don't show up when on petrol.

Sounds like the gas fitter hasn't put injector emulators into yours. When you change to LPG, he's probably just shutting the injectors off and they log open circuit faults.

101nicko

16th February 2009, 02:19 PM

g'day i have a d2 td5 diesel 5sp man. with ace and sls i purchased a sg2 but it will not work on my 2002 model 4wd please help thanks nick:(

101RRS

16th February 2009, 03:07 PM

g'day i have a d2 td5 diesel 5sp man. with ace and sls i purchased a sg2 but it will not work on my 2002 model 4wd please help thanks nick:(

I am sorry to say but I believe that ScanGuage is not compatible with D2 TD5s but is compatible with the V8.

Garry

fraser130

20th February 2009, 05:00 PM

I have a nanocom in Carlton (inner north Melb)
PM me if I can be of any help.

Fraser

Gold_TD5

22nd February 2009, 05:06 PM

What type of diagnostic tool is needed for the freelander TD4???
Is the Nanocom able to be used?
My step Daughter just got ripped for a new fuel pump.
The car still has the same problem, by the way it drives I'm guessing it is electrical, the engine light come on when ever it playing up. Possibly a sensor (CRANK?) it stutters/jerks even on the over run while slowing down. never seen a fuel pump give trouble when slowing down. Accelerates with out drama.
At Idle the revs picks up and slows then it will stall if you give it long enough.;)
Thanks in Advance Lionel

Psimpson7

22nd February 2009, 05:16 PM

Nanocom wont do the Freelander I ama fraid Lionel.

TD5 Defender and D2 only.

Gold_TD5

22nd February 2009, 05:43 PM

Thanks Mate.

Captain_Rightfoot

1st March 2009, 09:36 PM

Nanocom wont do the Freelander I ama fraid Lionel.

TD5 Defender and D2 only.
Does it work with V8 d2's? Can it reset 3 amigos in those cars?

Tombie

8th March 2009, 01:20 AM

Not sure if I posted...

Whyalla, South Australia...

Full Rovacom for all Electronic Landies..
Nanocom

And if you're in the area (Flinders etc) and I can help, I'll drive to where you are when possible...

jimbob

8th March 2009, 08:30 PM

NANOCOM in Mildura. Happy to help..:)

Zute

16th March 2009, 11:39 AM

Just ordered Nanocom, should have it next day or two.
Bottom end of ACT. If anyone would like to get together for a play and thinks they know how to use it, I'm all ears, as Ill be on a steep learning curve. Pm me if interested.
Peter.

Rupert Prior

16th March 2009, 09:17 PM

I`ve invested in a Multi-Tester it will read most DTC`s from 1989 to 2007. i`m more than willing to lend any member a hand, in the southern Sydney area.

Psimpson7

16th March 2009, 09:22 PM

Does it work with V8 d2's? Can it reset 3 amigos in those cars?

Sorry for the delay. From my experience at least when its running stand alone, no, as it cant initiate the V8 ecu's. I haven't tried it with the laptop plugged in yet, but i dont think it will.

Rgds
Peer

scott oz

18th March 2009, 06:31 PM

I've got a nanacom and I'm on the northern beaches NSW never used it. Am willing to do what I can to help a member and happy to join a nanacom day if one ever gets up:)

Redback

25th March 2009, 01:05 PM

OK we have a Nanocom now, we are in Helensburgh, so anyone in the Wollongong to Sutherland area that needs it, we are happy to help.

Baz.

DavidB

26th March 2009, 05:34 PM

Hi all,
I have a Nanocom. Not up to speed with it yet, but happy to help if I can.

Situated at Mudgeeraba. QLD.

Dave.

Quarks

26th March 2009, 09:05 PM

Murphy's Law strikes again! :rolleyes: -
I'd copied over the details to make up a new map while I was out tonight, but then after I do that, DavidB puts his hand up too, so I had to then add his entry in just now. :)

Anyway, it was worth it, :) as there are now forty in the list! :thumbsup:

This means that it's now 2 pages - first page is the map of where everyone is; but now identified by a number; cross reference with the second page to get name & details of the diagnostic equipment.

Now downloadable from the files section: AULROian Electronic Diagnostics Map (http://www.aulro.com/afvb/local_links.php?action=jump&catid=3&id=71)

I have removed the two previous versions from the files section so you can only find the latest copy.

:)
Geoff

davros

19th May 2009, 12:48 PM

Nanocom now available!
"By prior appointment!" School hols I may be hard to find though :):)
Cheers all,

Dave

ghand2

22nd May 2009, 07:43 PM

Willing to lend a hand if I can. Have a nanocom with fimwear version 2.04, Geoff.

strangy

24th June 2009, 09:30 AM

I am in Alice with a Nanocom.
So if your stuck, sing out.

*NB. No......, Ayers Rock, Kings Creek, Mt Dare are not just down the road.
But could be pesuaded if I'm not on shift!!!!

Cheers

Mark;):p

hugh

24th June 2009, 04:51 PM

I Have a year 2000 xedi diesel freelander.Can these be hooked up to
diagnostic equipment,and where abouts on the car can it be fitted

AussieAub

21st July 2009, 02:04 PM

Hey guys,
Just a thought, but is there a way a lsit can be compiled by state/area of people willing to lend a hand with Nanocoms/diagnostic equipment, rather than trawling through 10+ pages of posts?

Maybe some kind of list of users and their equipment, rather than lots of posts, thats all.....

Username - Equipment - State, Town (suburb code)
Initial contact could then be made via PM, rather than posting personal details. Maybe updated every 3 months or so?

Like I say, just a thought. :)

Cheers,

..:: KIEREN ::..
2000 Disco II Auto V8
Object Of Mass Consumption
AussieAubs Disco Page (http://aussieaub.blogspot.com)

nice1guv

21st July 2009, 02:13 PM

Hey guys,
Just a thought, but is there a way a lsit can be compiled by state/area of people willing to lend a hand with Nanocoms/diagnostic equipment, rather than trawling through 10+ pages of posts?

Maybe some kind of list of users and their equipment, rather than lots of posts, thats all.....

Like this...

Links and Downloads Manager - Australian Land Rover Owners (http://www.aulro.com/afvb/local_links.php?action=jump&catid=3&id=71)

Don't forget to scroll down, there are 2 pages.

Edit: Also mentioned above in post #92.

AussieAub

21st July 2009, 02:18 PM

Like this...

Links and Downloads Manager - Australian Land Rover Owners (http://www.aulro.com/afvb/local_links.php?action=jump&catid=3&id=71)

Don't forget to scroll down, there are 2 pages.

:o:D
Where'd that come from!?!?! (thanks)

Yep, pretty much like that!

Cheers,

..:: KIEREN ::..
2000 Disco II Auto V8
Object Of Mass Consumption
AussieAubs Disco Page (http://aussieaub.blogspot.com)

Rosscoe68

21st July 2009, 04:56 PM

Port macquarie central north coast nsw. i have nanocom and laptop pc and i am reasonably up to speed with it all.

Grumpy

10th August 2009, 09:58 PM

Yes I have a Nanocom and laptop. Not a full bottle on it yet - getting there tho.

Tony :wheelchair:

WOLF57

11th August 2009, 09:08 PM

Hi all,
I've got a generic OBDII reader. No good for three amigos or other Land Rover specific stuff, but works fine for reading and clearing generic stuff (engine codes, etc) on my '99 Disco II 4.0 V8.
I'm in Montrose, outer east Melbourne.

Quarks

21st August 2009, 11:02 AM

AussieAub

21st August 2009, 11:46 AM

I've got a generic OBDII reader. No good for three amigos or other Land Rover specific stuff, but works fine for reading and clearing generic stuff (engine codes, etc)

What he said for me too!!
I'm in Carramar (Northern Suburbs), Perth, WA.

Cheers,

..:: KIEREN ::..
2000 Disco II Auto V8
Object Of Mass Consumption
AussieAubs Disco Page (http://aussieaub.blogspot.com)

LOVEMYRANGIE

22nd August 2009, 12:46 AM

Looks like I need to keep working on the EASUnlock cable.

Think we need more listings for Classics... C'mon people!!!

Milton477

30th November 2009, 11:32 AM

I have a Nanocom in Kallangur, North of Brisbane. Still learning.....

Franz

22nd December 2009, 05:30 PM

Ok everyone,

I got off my backside again (:p) and now I have the August 09 version of the map done now... :)

AULRO Electronic Diagnostics Map (http://www.aulro.com/afvb/local_links.php?action=jump&catid=3&id=71)

This time I figured out how to update the map without breaking the previous links...;) so if someone uses an old link, they get the latest version anyway.:cool:

:)
Geoff
Time to get out of the armchair again and add me onto the list - I have a Nanocom in Doncaster, Melbourne and am happy to assist with fault code reading.

Cheers,

Franz

dmdigital

22nd December 2009, 05:49 PM

Better add to mine that I can read and clear codes on most CANbus systems now, can't do much else with CANbus as yet though.

airfireman1

22nd December 2009, 06:29 PM

I now have a Nanocom just getting used to it I am in Perth north of the river.

Mully

6th January 2010, 01:22 PM

If you are in Southern areas of Adelaide, I've got a spanking new Nanocom/laptop setup with latest firmware AND I almost know how to use it.... well, reading and clearing codes is pretty easy anywho.

Happy to help if u need to be plugged in and diagnosed.

Cheers.

Quarks

25th January 2010, 06:27 AM

Well, it's updated again! :)

AULRO Electronic Diagnostics Map - January '10 (http://www.aulro.com/afvb/local_links.php?action=jump&catid=3&id=71)

It's probably also worth a reminder that in most cases the price of this service is simply a donation to AULRO to help it keep going. ;)

:)

LandyAndy

25th January 2010, 10:32 PM

Thanks Quarks
Donation or encourage the reciever to take out a subscription.I dont and wouldnt charge anybody for use of mine.
Cheers
Andrew

gman

25th January 2010, 10:48 PM

I'm currently looking into getting either the NANOCOM or the Faultmate MSV-2 Extreme. Does anyone with a NANOCOM know if it reads the D2 TD5 Autobox? The Faultmate looks a good piece of kit but the single vehicle licence is a draw back if I get a second Landy and could cost me heaps in extra licence fee's.

Also where is it best to get a NANOCOM from, on shore or imported. Cost is an issue.

Thanks in advance for anyones help or advice.

Mikey

26th January 2010, 01:13 PM

Hi all, I have a Nanocom that is up to date with the latest firmware. All I have to do now is learn how to use it fully.

Location is Caboolture Qld, about 40k's North of Brisbane.

Cheers
Mikey

p38arover

26th January 2010, 01:32 PM

I have a T4 if you want to amend the map. I don't yet have the airbag dongle to allow me to reset SRS faults. I'll have to order that.

I now have the SRS dongle. I note I'm not on the map.

jf1056

11th February 2010, 01:45 PM

Hi all,
I have latest Nanacom and fast laptop. I am located in Baulkham Hills, Sydney.
Happy:D to clear faults, etc, give me a call:- 0418 403392.

John.

arpowell

27th February 2010, 11:02 AM

Hi,
Have recently moved to North Canberra (Belconnen) and have a Nanocom. More than happy to help out.

p38arover

27th February 2010, 11:22 AM

I don't suppose there is anyone in Adelaide with a Rovacom or similar who can help JSP sort his P38A problems. He's replaced the alarm receiver, BECM, and GEMS ECU with second-hand items from another vehicle but he's got lots of weird problems, e.g. immobilised, one headlight only comes one, blinkerts work on only one side.

A local LR expert wants a grand to sort it.

I suspect it needs a reset with T4 or Rovacom.

33chinacars

6th March 2010, 12:56 PM

Have ordered Black Box Solutions EAS Kicker for P38 with upgrades

Should arrive by the end of the week

Located Tyrendarra - South West Victoria

Happy to help

Gary

davidc

20th March 2010, 08:29 PM

hi
is there anyone close to nelson bay that may be able to help me with diagnostic equipment to sort out a auto trans problem 1999 discovery 2
td5
thanks
dave

33chinacars

20th March 2010, 11:18 PM

Have ordered Black Box Solutions EAS Kicker for P38 with upgrades

Should arrive by the end of the week.

Located Tyrendarra - South West Victoria

Happy to help

Gary

Yes My EAS Kicker has Arrived and alredy been put to good use

Gary

philjphil

9th May 2010, 05:48 PM

Hi DavidB do you still have the Nanocom I just bought a p38 95 4.0 SE in need of some TLC as a project and I am sure I will need to get it hooked up for some fault finding. I also live in Mudgeeraba. Cheers Phil

LOVEMYRANGIE

13th May 2010, 09:20 PM

bitdist

16th May 2010, 08:13 PM

Nanocom here in North Ringwood.. VIc. Happy to help

alien

25th May 2010, 03:29 PM

Nanacom now available in Bacchus Marsh Vic..
Happy to help:)

Davetd5

20th June 2010, 09:24 PM

Hi, Does anyone in Adelaide southern suburbs have a Nanocom or similar? I have the 3 Amigos and want to check and clear the codes. I''ve checked wheel sensor continuity and done the shuttle valve switch rewire, I just need to see if that will clear things or at least point me in the right direction. I've tried to contact members mullly and simonr23 but no reply yet. Can anyone help? Thanks, Dave.

trolley_73

22nd July 2010, 04:27 AM

G'day Andy,

Just got my Nanocom for TD5's today so if you can put me down for one in South Hedland WA, always happy to help out Landy owners if they run into strife on the way thru. Plenty of tools etc too if required. Now I just have to learn how to use it, looking forward to having some rear suspension again!

DougLD

24th July 2010, 02:47 PM

Hi All
My Nanocom arrived yesterday have setup the laptop and will connect it to the disco tomorrow to see how it goes I am at Coomba Park on the Mid North Coast NSW if anyone needs help but i am still learning.
Regards
Doug

topnham

24th July 2010, 10:55 PM

could i pleas have a go on you nancom simon

thank you if you can help i would be lovely

gazk

24th July 2010, 11:13 PM

I've been meaning to add my name to this list for a while - Have Nanocom and laptop setup and know how to use them for most tasks. Happy to help anyone around Nowra, NSW

Cheers

PaulP38a

17th August 2010, 11:52 PM

Time I added my name to the list. I am in Canberra.

I have a FaultMate MSV-2 with multi-vehicle software module for the Range Rover P38 HVAC system. I also have the single vehicle full licences for my P38 Rangie and Freelander but they are of no use to anyone else. I will consider adding other multi-vehicle modules that may be of benefit to local Land Rover/ Range Rover owners. Next ones I add will probably be BECM and SRS modules.

I also have:
EAS Unlock cables and compatible USB-Serial adapters (P38)
EAS Buddy (P38)
EAS Kicker (P38 and RRC)
EAS Kicker Lite (P38)
ABS Amigo (Disco 2)

Yes, I sell this stuff too... but these ones are my personal units that I use to "eat my own dog food" and make available to help out AULRO and LRC mates.

Cheers
Paul.

wanglemoose

23rd August 2010, 04:06 PM

Just like to add I have a Hawkeye unit unlocked for disco 2 and p38 RR,
However i don't have the extra dongle for the airbag suspension for the RR as mine is on coils and i don't need it.
Am happy to help out anyone and I'm located halfway between Ipswich and Brisbane in QLD.
Pm me if you need access to the unit.
cheers

mick

acgmarketing

25th August 2010, 07:20 PM

I have a nanocom on northside Brisbane in the "Hills" area. Not an expert by any means, but happy to help where and when I can.

HangOver

3rd September 2010, 11:14 PM

I have a generic reader that also clears codes and can check some sensors ie O2 sensor readings. I have only used it once on a BA Falcon to test it works.

If you have a vehicle probably non-landy that needs a code reading or clearing your welcome to bring your vehicle to my home.

It MAY do basic stuff on a D2 but I have never tested it.

PM if you want to arrange a time / date

Please note if anything goes wrong i will not take any responsibility, I guess that goes without saying really so just making sure ;)

edit**
I just looked at the diags map and I just remembered that an OBDII reader does read D2 codes as I know someone who has one on their D2

trog

11th September 2010, 07:34 AM

i have a nanocom but know idea yet as how to use it but would appreciate a hands on in exchange for usage or ? i am currently in broome but expect to be moving again in a few days on a liesurely pace toward perth

ssk

22nd September 2010, 10:45 PM

Only to happy to help out with Nanocom Evo in Craigieburn and surrounding areas....:) Not very confident and still have a lot to learn about the unit...[bigsmile1].. pm most nights!!!

Quarks

23rd September 2010, 04:17 PM

Hey everyone,

I've been a bit busy lately with uni work, so haven't had a chance to update the map - and the way things are going, won't get to it for a few more weeks (thesis due soon).

However I'm advised by peter5111 that he now has a Nanocom Evo, not a Scangauge.

:)

dustnmud

24th September 2010, 01:51 AM

Hi everyone,
Nanocom just cleared customs. Will be available to help anyone,and am in Dunkeld Western Victoria
I may learn something.
Bob T.

FenianEel

28th September 2010, 07:34 PM

Just got a Nanocom, located 7ks south of Brisvegas.
Complete newby with it at the minute, but happy to assist anyone, if needed.

mirror11726

3rd October 2010, 09:43 PM

I've got a Nanocom Evolution in Largs Bay, South Australia if it helps anyone.

Cheers,

Pete.

D I

19th October 2010, 04:09 PM

I have a Hawkeye, gaf tape and a hammer.....so I can do just about anything.

My workshop is at Toongabbie 2146 if that is of any help to anyone:D

Only unlocked for D2....but apparently petrol and TD5

LOVEMYRANGIE

14th November 2010, 12:07 AM

My Blackbox EAS Kicker will be arriving in about a week or so. Its the upgraded version allowing you to modify the actual heights.
Will only have a lead to access a Classic.

LOVEMYRANGIE

24th November 2010, 10:36 PM

OK guys n gals

My Blackbox Solutions EAS Kicker has arrived!!!
Any members in Perth requiring help with resetting and diagnosing EAS faults in Perth for Rangie Classic are welcome to PM me.

Mods, please add me to the current map of available equipment.

Cheers

Andrew.

HangOver

24th November 2010, 11:22 PM

will it fix a ford falcon :wasntme:

PaulP38a

24th November 2010, 11:43 PM

will it fix a ford falcon :wasntme:
Sure it will... provided the Falcon runs a Lucas EAS Classic ECU with a Red 14 CUX connector :D

If the Falcon has been updated to the Lucas EAS on the P38, this won't help unless you get the Black OBDII lead and software upgrade for the Kicker.

Cheers, Paul.

LOVEMYRANGIE

24th November 2010, 11:52 PM

will it fix a ford falcon :wasntme:

There's only two things that fix a Falcoon:

1- sledgehammer
Failing that
2- stick of gelly and a jerrycan of avgas out the back of the pines!!!
BWAHAHAHAHAHAHAHAHAHAAAAAAA!!!!!!!!!!!

HangOver

25th November 2010, 10:02 AM

I was just thinking a coat of fire would do it the world of good :D

Mully

18th December 2010, 11:58 PM

No longer have the Nanocom due to sale of D2... along with the Nanocom.

Was unable to edit the original post hence this one.

badlad

19th January 2011, 07:44 PM

just got my hawkeye disco 2 only caboolture area

Bundalene

14th February 2011, 07:01 PM

We have a Faultmate for the Puma Defender - Not VIN specific, including 10AS, Wabco ABS and the Puma. Still learning about it's functionality. The unit appears to be able to programme FOBs but we haven't tested this yet.

Also The Snap ON analyser we have listed earlier also communicates with the L322 TD6 Range Rover, possibly others as variants as well.

Located at Horsley Park, Western Sydney

Erich

LOVEMYRANGIE

14th February 2011, 09:10 PM

Theres going to be a bunch of new Nanocom Evo owners on this list shortly too thanks to Paul @ Hardrange!!
May as well add me to the list for when it arrives in a few weeks.

Andrew

Sent from my backyard TeePee using smoke signals.

one_iota

8th March 2011, 12:42 PM

Nanocom Evolution for Puma Defender in postcode 2204.

Reads WABCO ABS and Alarm as well as the Puma Engine and Instruments.

PaulP38a

8th March 2011, 09:58 PM

Add another Nanocom Evolution to the list... available in the Canberra/Queanbeyan area for AULRO and LRC ACT members to use at my place or by arrangement ;)

Suits Disco II TD5 and Defender TD5, maybe Puma if/when I buy the extra unlock codes.

Cheers, Paul.

jordsvin

4th May 2011, 08:40 PM

Hi folks,

I have an unlocked Faultmate Nano, it has all modules for Defender TD5:
10AS alarm
TD5 ECU
TD5 ECU programming
Wabco ABS

I believe it will talk to these units on any vehicle e.g. TD5 on Disco but have yet to try it.

Sydney postcodes 2011 and 2019.

Yours,

Andy

alpick

25th June 2011, 02:00 PM

Nanocom evolution for D2 in coogee

Quarks

6th August 2011, 08:23 PM

Well, I've finally got round to revising the map, took two attempts to make all the necessary changes to update it. :cool:

It's attached, as the files section (where it normally lives) appears to be broken at the moment with all the upgrade/restore happenings. When everything is going fine again I'll put it there for reference.

:)

mools

6th August 2011, 10:03 PM

Nanocom Evo for Defender Td5 in postcode 2333. PM if required.

Ian.

PaulP38a

6th August 2011, 10:50 PM

In addition to FaultMate multi-vehicle for P38 Range Rover, and Nanocom Evo for TD5 Defender and Disco 2, now have a Nanocom Evo 2 for Disco 2 TD5 in Queanbeyan NSW 2620 /Canberra 2600.
Soon to be adding Motronics V8 module to the Evo 2 when BBS issue me the code.

Cheers, Paul.

Xtreme

7th August 2011, 04:31 AM

Add another Nanocom Evolution to the list ............ available in the NW Sydney (Hornsby) area.

Suits Disco II TD5 and Defender TD5, could also do Puma if/when someone wants to buy (about $50) the extra unlock code.

33chinacars

8th August 2011, 11:09 AM

Sorry, BBS EAS Kicker no longer in Tyrendarra. Sold with P38.

Waiting on IIDTool for L322 to arrive from gap-diagnostics.

Gary

djam1

8th August 2011, 05:44 PM

Nanocom Evo for Defender TD5 Karratha Post Code 6714

dswatts

10th August 2011, 07:30 PM

Nanocom Evo for Disco TD5 in postcode 6163

PaulP38a

10th August 2011, 10:46 PM

foz.in.oz

12th August 2011, 01:58 PM

Nanocom Evo for Defender TD5 in Gladstone Region Postcode 4680

Quarks

12th August 2011, 03:59 PM

Why is it that whenever I post up a new map there's always a few more who come along? :mad::angel: Not to worry, there are now over 80 members willing to help out, fantastic! :D

Anyway, all of the above has been incorporated into the:
AULRO Electronic Diagnostics Map (August '11) (http://www.aulro.com/afvb/local_links.php?action=jump&catid=3&id=136)

For some reason the files manager won't let me update the previous one, so it's a new entry.

And should you make use of the services offered in this thread, make sure that you subscribe (http://www.aulro.com/afvb/payments.php) or make a donation to AULRO. ;)

greg-g

13th August 2011, 04:41 PM

Nanocom Evo for Disco TD5 in postcode 7301

fraser130

14th August 2011, 07:30 AM

Nonocom gone as I have sold the Defer - Carlton, VIC

Fraser

nobbyclrk

16th August 2011, 11:59 AM

Blue mountains. Springwood 2777.

http://www.decautomotive.com.ar/Res/Version/36_2.pdf

Dec Superscan. A bit of change from Nanocom.
More than happy to pull and clear your codes.

Cheers.
Andrew.

LROK

16th August 2011, 07:54 PM

Nanocom evo for Disco II, Td5. Stoneville WA (Perth Hills near Mundaring) 6081

Fluids

17th August 2011, 02:43 PM

Well I've had it for a while now, so I guess I'm good for a Nano or two ...

Port Stephens, 2316

Nanocom 1 with latest 2.06 (incl' SRS + Gearbox) and if any V8 owners wish to buy me a Nanocom V8 licence and load onto my Nano I'll happily look at your V8 D2 :)

roversmith

19th August 2011, 08:14 PM

Better add us to the map, Nanocom at Glenisla, Victoria. Near Horsham. Happy to help.

bell1975

25th August 2011, 05:19 PM

Nanocom Evo II in Murgon, QLD 4605. Td5 codes only.

IanP

26th August 2011, 08:25 AM

You can add me to the map. Nanocom Evo, Dandenong Ranges Victoria.

kenworth108

18th September 2011, 10:07 AM

hi there add me to list ,hawkeye v4 bendigo victoria ,td5 discovery 2 :cool:

ziadnahas

4th October 2011, 09:37 PM

Franz

5th October 2011, 07:17 AM

Hello everyone

I would like some help with my disco, i got several issues, the three amigos and key fob issue. I also would like to update my computer so that it produces better performance. I have had some stories with obtaining upto 25% power, using the nanocom.

I'm currently wrecking a 04disco and can offer parts for assistance.

I have a disco2 03 TD5

Regards
Where are you located in Melbourne?

Three amigo's can only be partially & temporarily be resolved with a Nanocom. Not sure what your key fob issue is and whether it's a Nanocom fix.

ECU update requires a programme + nanocom to install. Nanocom is not the only requirement for an upgrade.

Pm me and we'll see what can be done to resolve some of your issues.

Cheers,

Franz

beanie_205

13th November 2011, 04:16 PM

Hi all, I have a Nanocom EVO 2 here in Darwin and happy to help anyone who needs it. It's for a td5 ( I have a Disco 2a).

enery8

19th December 2011, 03:56 AM

Likely not much use really but I am in Weymouth, Dorset, UK and maybe there are more UK resident members of this forum so..........if anyone needs DTCs read/cleared while in my neck of the woods, let me know. I have a Hawkeye V5 licensed for P38 Range Rovers.

Titch101

19th December 2011, 07:33 AM

Anyone down near Geelong or holidaying down the Great Ocean Rd this summer, I have an Nanocom Evo2 with Disco2 TD5 codes available for use.

Geoff86RRC

20th December 2011, 09:45 PM

just got my hawkeye disco 2 only caboolture area
Greetings I am in Brisbane with 2000D2V89 with intermittent 3 amigos problems. Does the Hawkeeye diagnose? My workshop said 3,000 without looking at it. Are you able to help? thanks Geoff 043332 0000 txt or gngunn@powerup.com.au

4runnernomore

23rd December 2011, 10:50 PM

any one in the Darwin area I have just Recieved my Nanacom II with Disco TD5 codes available.

Cheers, Chris

biggin

31st December 2011, 10:41 AM

Happy to help fellow D2 Aulroians in need of Nanocom Evo II, in Moe area.

db65boxer

6th January 2012, 09:47 AM

Happy new year

Now have nanocom evo2 discovery 2 td5 happy to help out Mudgee NSW 2850, must bring beer:)

db

gerardw

25th January 2012, 07:16 PM

Hi i have a Nanocom evo ll discovery 2 TD5, happy to help out those who need access to one. located: Pakenham Victoria cheers Gerard

ariddell

20th February 2012, 10:28 AM

I have an RSW AllComms for 2002-2005 L322 Range Rover and a VCM with IDS software for anything post 2005 ie L322/D3/D4/RRS etc.

Cheltenham, Vic.

Cheers,

Al

OffTrack

20th February 2012, 12:55 PM

I have a Nanocom EVO II unlocked for Discovery 2 TD5 and V8. Located in West Brunswick, VIC.

Cheers
Paul

wrinklearthur

18th March 2012, 11:38 AM

Here ya go, Pedro:
AULRO Diagnostics Map (http://www.aulro.com/afvb/attachment.php?attachmentid=9636&stc=1&d=1216455526)

And I'm happy to help out where I can - Nanocom in Northern Sydney Geoff

http://www.aulro.com/afvb/local_links.php?action=jump&catid=3&id=136

This Map looks like it could be useful, or is it about technology that has past on?
.

Pedro_The_Swift

18th March 2012, 12:13 PM

not if the cars are still on the road--;)

NPEP

21st March 2012, 07:01 PM

I have a Nanocom Evo 2 with unlock codes for Discovery 2, Motronic V8, P38a & GEMS V8.

Can unlock/ reset codes but not sure about anything more technical.

Located Shellharbour south of Wollongong NSW 2529

Pinelli

9th May 2012, 08:39 PM

Just got my Nanocom, with the codes for the Disco TD5.
Whitsundays, Qld 4800

Josh_WA

9th May 2012, 10:11 PM

I've got a nanocom evo for the td5 defender on the way should be here next week. :D

dolphinberserk

27th May 2012, 11:49 AM

Just took delivery of Nanocom for Td5 Disco II directly from manufacturer in Cyprus: https://blackbox-solutions.com/
Service has been very helpful so far. Getting through the unlock process is onerous but fair enough given the high incidence of technology theft these days.

Very happy to help anyone who wants to drop by (Nanocom only unlocked for Td5 Disco II for now but if you can afford the unlock code from Blackbox we can upgrade the device to help with any Landy)

Elanora, Gold Coast (between Burleigh and Coolangattawhat'sthematter)

Rich

clubagreenie

25th June 2012, 07:01 PM

Nanocom Evo now in Sydney 2147 (Blacktown area).

At the moment available for V8 D2, but will look at unlocking for other if required.

Yorkie

25th June 2012, 07:59 PM

Nanocom Evo now in Sydney 2147 (Blacktown area).

At the moment available for V8 D2, but will look at unlocking for other if required.

oh goodie ;):angel:

justfishing

25th June 2012, 08:04 PM

Hello,
I have a Nanocom Evo for a TD5 I live in Beechboro WA 6063.
Ian

clubagreenie

25th June 2012, 11:38 PM

oh goodie ;):angel:

Add 49-pound for TD5...

Td5disco

28th June 2012, 11:01 PM

Hello,
I have a Nanocom Evo for a TD5 I live in Beechboro WA 6063.
Ian

Hi Ian not sure if you can help but had the three amigos come up when hitting a speed bump would it be possible to clear these as I think it's just a faulty wheel sensor. Happy to pay you over a lr dealer

marquis

8th July 2012, 10:33 PM

OffTrack

9th July 2012, 05:52 AM

I'm after a Nanocom Evolution for my RR P38 gems. I have been made unemployed recently so am looking for a cheap diagnostic tool / toy, to while away the hours, Is the 20% discount from BBS still in effect or has it elapsed?
Not sure I would qualify for it anyway, Being on the otherside of the World. (UK).
Cheers for your responses.

20% was a christmas special. 10% for initial equipment purchases is still available to AULRO members. From memory you need to have been a member for more than 6 months and have made more that 100 posts to the forum to qualify. This was designed to prevent people signing up just to get a discount.

Barefoot Dave

9th July 2012, 09:10 AM

Just realised I didn't add myself to the list.
Rectified；
Nano Evo- D2 TD5
Happy to share payment of upgrades for your car.
P38 requires bespoke cable to come from Cyprus.
Dave.

MarknDeb

6th August 2012, 06:00 PM

Ok if anyone in Launceston area needs help i now have the Nanocom EVO, it has Defender, D2 and P38 on the menu, send a PM and we can arrange a meeting.

Mark

Daniel

7th August 2012, 06:32 PM

I have a HawkEye diagnostic tool with all variations of RRC, D2 and L322 enabled. Hunter Valley NSW.

woko

9th August 2012, 07:14 PM

I have a Hawkeye unlocked for Freelander 1, also have grey cable. Singleton NSW

Chilly

9th August 2012, 08:00 PM

NANOCOM

D2 V8 Discovery

Hamlyn Terrace, Central Coast

schuy1

13th August 2012, 09:32 PM

Got my Nanacom Evo last week for my TD5 Discovery auto. So if any1 in postcode 4627 and 4715 ( weekends) needs faults read......Pm me
\

Ean Austral

14th August 2012, 06:27 AM

Gday All,

I have Hawkeye for D3, So if in Darwin and need codes read, send me a PM.

Cheers Ean

vee8auto

14th August 2012, 01:31 PM

Nanocom Evo unlocked for Discovery II TD5 engine and SLABS etc.
Bunbury 6230 WA.
send a pm, or 0419627556 if travelling through and need urgent help.

Note, not a proficient nanocom driver yet, got my trainer wheels on still...

cheers,
Noel.

Pierre

19th August 2012, 08:29 PM

Added to the tool file - little brother to Nanocom for TD5 latest version software & firmware.

PM or email will reach me most times.

Cheers

Pete

QLDMIKE

19th August 2012, 09:10 PM

Tool: Nanocom
Licences: TD5 & Dico1/Defender A10 Alarm
Location: Canberra

neil 90

20th August 2012, 06:37 AM

Hi. I have a hawkeye for a L322 in beaudesert if anyone needs help

cheers

neil

clubagreenie

20th August 2012, 08:46 AM

If anyone in Darwin has a nanocom for D2 and can help out, Reg, http://www.aulro.com/afvb/members/reg.html. PM's me earlier and needs help to power bleed after changing some hoses.

1976_michelle

20th August 2012, 09:02 AM

Might be good if landyandy would update his very first post in this thread with the link to whatever is the most current file. Would save people looking on almost every second page to find the most recent link only to find it was on the other every second page they missed etc :D

Also, when at home the current format is fine, however when on the road browsing capability is often limited by phone access etc - instead of a map with locations and numbers to crossreference against another list, would coloured dots or some other symbol work? This way you can recognise instantly that the assistance at points a, b, c could help your particular type of vehicle but the unit at point d won't be useful at all as its coded only for td5.. or whatever
Just a thought.
I'll be on the list eventually but not yet

TD50WA

19th November 2012, 07:08 PM

Hi all

Just invested in a nanocom evo for D2TD5 and P38. I live in Alexander Heights WA.
Pm or email.

Have no idea what I'm doing yet though........:D.....but always ready to help.;)

Ralph1Malph

20th November 2012, 04:51 PM

Nanocom evo, D2 TD5 auto
NW burbs Brissy

Ralph

BLUEDEF

10th December 2012, 09:47 PM

hey all

Just got a nanocom evo for my 2002 defender. PM me if you need diagnostic . I paid 80 bucks for local stealer to diagnose before I bought this-they didn't even know where the port was...still charged me and stated they could not connect the diagnostics equip to the car... what a joke......
My nancom will connect to td5 defeneder also td5 landrover.
DON'T GO TO LOCAL DEALER IN ADELAIDE.

Modelsp

27th December 2012, 08:42 PM

Hi there this is my first post,thanks to Erich @horsely Park.
i have 2 disco's a'95 series 1,and an '04 series 2s with 2 of every bling they could put in at the factory,
i can clear fault codes and some other things as i too am a learner with this nanocom thing
I'm at Primbee south of Wollongong if anyone need codes read.TXT me as i'm a bit deaf, 0437166828
Paul.:)

OffTrack

30th December 2012, 12:14 PM

I'm in the process of trying to clean up the listing of members with Diagnostic Equipment and have removed a number of members who no longer have access to diagnostic gear for various reasons.

For the moment the most up-to-date mapping is an unlisted google map which shows the location of members who have diagnostic gear. The location given is within the post code area supplied by the member. You'll still need to come back to AULRO to PM the member you wish to get in touch with.

https://maps.google.com.au/maps/ms'msid=218400750788295972519.0004d2028daa79a1b492 9&msa=0

Where the information is available I have tried to colour code vehicle support.

cheers
Paul

p38arover

30th December 2012, 12:24 PM

Paul, colour me green. The T4 will do multiple vehicles.

OffTrack

30th December 2012, 12:33 PM

Paul, colour me green. The T4 will do multiple vehicles.

Done!

Rok_Dr

30th December 2012, 01:14 PM

Hi Paul

Many thanks it's long overdue!

You can also add me to the list as well. Nanocom evo, discovery 2 td5 auto. Post code is 6149.

Have a great new year

Cheers

Steve.

mattyg

30th December 2012, 01:33 PM

Please add me to the list as well.
Nanocom Evo Disco 2 TD5 Auto.
Wangaratta Vic 3677

gavinwibrow

30th December 2012, 01:41 PM

Hi Paul. I'm just around the corner from dswatts, with the same equipment - Nanocom Evo for Disco 2 (TD5) Postcode 6150 - Fremantle. Feel free to add me to the list.
Cheers Gavin

OffTrack

30th December 2012, 02:32 PM

All added.

Thanks guys.

PaulP38a

30th December 2012, 11:54 PM

OffTrack

31st December 2012, 06:39 AM

Impressive map, I see there are a few of us around Canberra now... but not enough P38's for my liking ;)

Looking forward to seeing the updates I sent through as I have changed some of my diagnostics gear since the last update.

Cheers, Paul.
Done now. Could have sworn I did that yesterday :rolleyes:

What I've done is to go through the entire thread and create a master list of all members who have put their hand up. I then removed members where they have posted that they no longer have the gear, or in one case I knew the owner no longer had a LR (I'd looked at buying his D2 from the following owner 18 months ago). The bulk PM to members on the list has turned up a number of people who no longer have diagnostic gear for various reason or due to vehicle upgrades now have gear locked to a single VIN. Others have gear that is non-functional in some respect or is suspected to be a bit dodgy.

There are probably listings that still need to be removed from the map. I'm giving members until the end of January to respond to the PM at which point they will be deemed to be no longer active.

I'm heading off for a few days over new year, but will double check all the responses when I get back and update the map as required.

cheers
Paul

gavinwibrow

31st December 2012, 10:14 AM

Oops Paul - typo. I'm 6160, not 6150 (Fremantle). Cheers Gavin

TerryO

9th January 2013, 11:26 AM

Hi Offtrack,

could you please add me to your list thanks.

I have two Hawkeye's, one that has the D2 software on it and the other is for D3's.

I'm located in Goulburn, NSW's 2580.

cheers,
Terry

winaje

15th January 2013, 05:45 PM

Hi Offtrack
Nanocom Evo 2
DII TD5
Still learning to use it
Postcode 3153

applemac

16th March 2013, 05:24 PM

Nanocom Evo
For Defender TD5

I'm a beginner but can always try to at least read fault codes.

Cairns, Queensland

Grimace

20th March 2013, 06:36 AM

Rovergauge (pc/laptop software) - Can check (some) and clear (all) codes from 14CUX equipped vehicles. 1989-1994 RRC, EFI Dicsovery1s.

Paper clip :) - Can carry out blink test, to check and clear any fault codes with the abs on late model discovery 1.

Note: Also have timing equipment and ability to adjust and check settings of the Mass Air Meter (5AM).

Parkwood (Gold Coast) - QLD 4214

R2D2

20th March 2013, 10:41 AM

Hi Guys and gals

I got myself a Nanocom Evo at last.
Unlocked for Td5 Disco2 only.
Western burbs of Melbourne.

R2

woko

25th March 2013, 08:58 AM

Just upgraded my Hawkeye. now does Freelander 1 & 2. Singleton NSW

d2dave

10th April 2013, 09:58 PM

I have recently purchased a Nanocom for Td5 Disco. Happy to help any one in the Shepparton area.

robbotd5

11th April 2013, 07:44 AM

G'day Andrew.
I'd be happy for you to add me to your list. Nanocom Evo for TD5.
Regards
Robbo

Shakey

11th April 2013, 08:56 PM

Me too - Nanocom Evolution 2 TD5/D2 - WA 6019

joel0407

5th June 2013, 09:51 PM

Please add me to the list. Lyon, Darwin NT 0810.

Happy to help anyone with a D2 TD5. Nanocom Evo.

Happy Days.

Benny_IIA

6th June 2013, 12:30 AM

add me as well nanocom 1

brookfield brisbane 4069

rangieman

7th June 2013, 06:06 PM

Add me also Lang Lang in Vic 3984
Nanacom (1)

Although my Nanacom is on holidays in Rochester at the moment with a forum member ;) It should come home soon hopefully :angel:

mfc

15th June 2013, 05:26 PM

ive a nanocom evo td5 defender in toongabbie victoria if youd like to add me
regards mark

woko

29th June 2013, 01:35 PM

Hawkeye- Freelander 1 & 2 Discovery 2
Singleton NSW

Daniel

30th June 2013, 04:44 PM

Is anyone able to assist with Defender td5 diagnosis in the Newcastle Hunter Valley area NSW?

PeteH

4th July 2013, 05:42 AM

Hi, you can add me to the list:

Nanocom 1 - TD5 Defender

Douglas Park, NSW 2569

clubagreenie

4th July 2013, 06:29 AM

My Nanocom Evo is back online for D2 V8.

Sydney 2147

PhilipA

4th July 2013, 07:33 AM

I have Nanocom Evo for Discovery TD5 auto at Avoca beach central Coast NSW.
Regards Philip A

OffTrack

4th July 2013, 08:13 AM

Map has been updated:

https://maps.google.com.au/maps/ms'msid=218400750788295972519.0004d2028daa79a1b492 9&msa=0

4runnernomore

8th July 2013, 08:33 PM

Finally registered my Nanocom Evo II

Please add me to the list. Millner Darwin NT 0810
License for D2 TD5. Nanocom Evo.

Cheers, Chris

rangieman

9th July 2013, 09:25 AM

Map has been updated:

https://maps.google.com.au/maps/ms'msid=218400750788295972519.0004d2028daa79a1b492 9&msa=0

Oh no still wish i had my Td5 Defender;)
But unfortunatly It's a D2a Td5 now Thats life:cool:

OffTrack

9th July 2013, 02:54 PM

Oh no still wish i had my Td5 Defender;)
But unfortunatly It's a D2a Td5 now Thats life:cool:

Done... without any mention of what vehicle I took a punt that your pic reflected your current drive. It was either that or a P38a ;)

rangieman

9th July 2013, 02:58 PM

I'll fix it up... without any mention of what vehicle I took a punt that your pic reflected your current drive. It was either that or a P38a ;)

P38 no thanks ive had enough hassles in life with out pushing it;)
Honestly the one in my sig was a Tdi Deefer long gone to god:eek: