Disco series II caliper bolts

[twitchy]

Can anyone tell me what socket is required to undo the front disc caliper on the series II Disco??? Need to change a few bits & fix the bloody traction control.

[abaddonxi]

Before the clever folks jump in, I'll guess 14mm 12point. Pretty sure that's what's on the Defender.

EDIT; Ah, look here
http://www.aulro.com/afvb/technical-chatter/53952-how-remove-axles-diff-gears.html#post717449

Cheers
Simon

[feral]

Not quite.....

Could be 17mm 12 point. Normal Sidchome socket on a breaker bar. Just remember the top bolt is very close to the sensor wire. Treat very carefully :eek:

I have just changed the rotors on my D2 today and that little screw that hold the rotor is just a little bit difficult.

Decorum prevents me what I really think of it :angel:

:oops2: its 19mm.

Here's the link...

http://www.aulro.com/afvb/technical-chatter/29805-discovery-ii-brakes.html

[Pedro_The_Swift]

The good thing about that little screw is the lack of replacement need---:angel:




oh and be carefull of the small rubber o ring in the sensor---

[twitchy]

cool, thanks lads. I need some new discs & the front left sensor is giving me ****e........ again.:mad: