91 rangie

[classic]

something let go in the drive line the other day i suspected the tranfercase just climbing a steep road underload and bang !! no warning no drive in any gears hi or low.still at a mates place havent taken the drain plug out to look at the oil yet i herd thiers a slip joint between the auto and the transfercase and they can go or mabe a broken chain either way not good thanks chris:::wheelchair:

[Slunnie]

did you try locking the centre diff? I've heard of axles/diffs breaking on the road while driving.

[classic]

1991's has a viscous coupling with just a high and low ratio.
thanks anyway
chris

[350RRC]

Hi,

Splines in torque converter failing. Slunnie this is relevant to what you are doing.
I'm DL on the OL forum.

cheers.

[Bradtot]

Hello Chris it will more than likely be the transfer case shaft between the rear output and front output behind the viscus
have a look at this http://www.aulro.com/afvb/technical-chatter/54311-borg-warner-tansfer-case-pics.html

and

http://www.aulro.com/afvb/general-chat/54303-95-classic-drive-train.html
I did mine before it went Bang as It is a common problem with high k Rangies mine had done 360k and was ready to go bang.
they are very easy to dismantle and repair.
Brad:D