View Full Version : 300Tdi Alternator
Disco300Tdi
4th May 2008, 07:28 PM
I was returning home this afternoon from the Mt Terrible Hut in the High Country, only about 130k from home when suddenly the tacho died and the battery light on the dash came on. :eek:
Pulled over, checked to see that I hadn't thrown the serpentine belt. Using a test light, checked for any output,,,,nil, zip, nothing,,,,only a loud rattling sound coming from the alternator. :mad:
Has it died a quick death ?:confused:
Can it be rebuilt ?:confused:
What price am I looking at for a new and or 2nd hand alternator ?:confused:
Sorry peoples, I am only a carpenter, not an auto sparky..:)
incisor
4th May 2008, 07:59 PM
disco 100 amp alternator = about $400 in my experience
i got a denso version of the MM unit for that sort of money a couple of years ago.
there are other options that require varying degrees of ginning around. i had no time to take one of those routes...
Disco_owner
4th May 2008, 08:00 PM
Hi Gav;
Found this , magnetti Marelli Rebuild by our very own Langy,
http://www.aulro.com/afvb/technical-chatter/25589-pics-tdi-alternator-rebuild.html
They are relatively easy to rebuilt , I rebuilt mine that had a noisy bearing , or you can take it off and take it to an Auto Electrician to rebuild it for you and then put it back on , as for cost not really sure how much ?
Alternator Service (http://members.ozemail.com.au/~defender110/mypage/alternator_service.htm)
LandyAndy
4th May 2008, 08:10 PM
If you can rest the Landy remove the alternator and take it to a good auto sparky.
Im sure your local AULRO mates will guide you in the right direction.
Loads cheaper do get rebuilt if you present the unit to them rather than them removing refitting,they prefer not too.
I have a mate who is an auto eleccy,all my starter motor alternator issues get sorted this way.Even if he is busy,its a quick fix when its already out of the vehicle.They have all the gear to test it off vehicle so the vehicle isnt required.
Goodluck
Andrew
rangieman
5th May 2008, 05:18 PM
300Tdi
Magneti Marelli # MAN127IR-100A-14V
# MXA828
Suits Ford Transit Van replaces 63341345
Thats what i used when mine died , only thing i did was swap the pulley over and every wire connected up:D
Oh and it had a 3 year warranty
loanrangie
5th May 2008, 10:01 PM
300Tdi
Magneti Marelli # MAN127IR-100A-14V
# MXA828
Suits Ford Transit Van replaces 63341345
Thats what i used when mine died , only thing i did was swap the pulley over and every wire connected up:D
Oh and it had a 3 year warranty
How much and where from ?
rangieman
5th May 2008, 10:11 PM
About 400 i think , i got the local auto lecky to get it in:D
lokka
6th May 2008, 12:07 AM
Crikie $400 is way too dear i lined one up for ace last time he was here as his died think it was around the $260 mark for a new MM and it came from All 4x4 at kotara tho im sure i found a cheaper one after he comitted to the one from all 4x4 il have to have a look in my book and see :D:D:D
rick130
6th May 2008, 07:25 AM
Lokka, Baxters down your way have them, Baxters # 63321347, or OEX list them too, OEX # MXA 831.
The specs if you are trying to get one are
J180/twin leg type,
Adj & pivot hole diameter 8.2mm
Adj. pivot hole length 148mm
Length foot to foot 80mm
Shaft 17mm
Pulley diam. 53mm
Powered by vBulletin® Version 4.2.4 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.