View Full Version : XR6 Turbo H.P
LandyAndy
5th May 2008, 07:11 PM
For you XR6 Turbo pilots(there are 1 or 3 on here) whats the highest HP you have heard from one of these machines.
How does 660kw at the rear treads sound????(has dyno sheets to proove)
The guy doing grader training for me has a F6 Typhoon thats had extensive underhood modifications.
He got the most powerful ford at the Dyno shootout at the Clipsal 500,460kw at the treads with a blown headgasket.
Is undergoing more engine treatment over east at the moment.He is hoping its ready in time for a big Dyno shootout comp in Melbourne in a couple of weeks.His goal is 750kw at the tyres.If its ready intime watchout for an article in Wheels Mag,they have already told him the 660kw is impossible,and if he competes they are to be there to see it.
Apparentley when he floors it in 3rd on the dyno it smokes the bags!!!
It runs a 9 sec 1/4 mile and cant get traction!!!
Andrew
TimNZ
5th May 2008, 07:21 PM
Fords produce horse power???? :wasntme:
(Crap, I've just realisied that I've just ordered a vehicle with a Ford engine :oops2: )
Lucus
5th May 2008, 07:25 PM
Pm me andy if you are keen to find out some more info in this car. I know the guy that orginally built the engine and tuned it and can also shed some light on the new tuner and the allegded 660rwkw and 9 sec pass. Luke
rangieman
5th May 2008, 07:29 PM
So is it the Horse power factory (HPF) in dandenong doing the work , ive heard 400 kw out of xr6t ,s which is very impressive:D
LandyAndy
5th May 2008, 07:37 PM
Hi Lucus
Im just waiting to see it in a mag:cool::cool::cool::cool::cool:
Rangieman,will be seeing the owner thursday for another days torture(training),will ask who is doing the work at the moment.
Some of the mods he was rattling off were amazing!!!
Andrew
Lucus
5th May 2008, 07:44 PM
Andy, google "dynowog" and have a read. More importantly what wolf are u running on ur 4.6?
LandyAndy
5th May 2008, 08:00 PM
3D
I know little of it,bought the vehicle of RichardK.
Send him a PM,Im sure he will be more than happy to help with tech info.
Will google that,thanks.
Andrew
Swampy
5th May 2008, 09:28 PM
Got this vid in a Email couple of years ago but found it on you tube 1000hp.
YouTube - 1000hp Ford XR6 Turbo Engine (http://www.youtube.com/watch?v=kwQKJEH-yJw)
Cheers Mick
Lucus
5th May 2008, 09:36 PM
The engine was built by Simon Guishus from Nizpro. It used to reside in a blueplrint xr6t sedan owned by Brian Lord. The car was written off in a crash and the engine is now in Brians BF F6 typhoon. Simons purple ute also has a similar build of motor in it but i believe simons ute is the 1200hp version.
Luke:)
Tusker
6th May 2008, 07:19 AM
How can they get accurate HP figures if its spinning on the rollers??
Gota take these figures with a pinch of salt. Every dyno gives different readings, even the humidity on the day affects the results.
Anyway, has this thing been on an engine dyno? Is there a dyno big enough??
Regards
Max P
SuperMono
6th May 2008, 08:52 AM
These dyno shootout competitions produce big numbers because they are run to a standardised set of conditions and atmospheric correction factors.
So an engine can be tuned to make all of it's power at a particular point, torque spread and drivability don't matter.
Having said that, any road car that can produce more than 500kW at the wheels is a monster of one type or another.
Powered by vBulletin® Version 4.2.4 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.