View Full Version : fast---
Pedro_The_Swift
7th May 2008, 11:58 AM
just worked out the race cars top speed,,
33"tyres
1.28 top gear
4.22 diff
7000 rpm
= 214kph
:eek:
bloody hell!
wondered why the poor little tractors tyres on the front were "crowning"
:lol2:
on one straight we held 7grand for more than 30 seconds:eek:
Outlaw
7th May 2008, 12:02 PM
huh? ;)
p38arover
7th May 2008, 12:59 PM
Get with the program, Josh! :o
Pedro was away over the weekend navigating in an off-road race.
That's why it was so peaceful here! :wasntme:
feral
7th May 2008, 01:38 PM
So....how did we go Pedro the Swiftest? :p
Or do I need to 'get with the program' as well ;)
Pedro_The_Swift
7th May 2008, 01:42 PM
read it and weep---
http://www.aulro.com/afvb/parking-lot/56291-spat-out.html
Outlaw
7th May 2008, 02:02 PM
Just like his own private forum here in the Parking Lot isn't :D:D:D
Sandtoyz
7th May 2008, 05:46 PM
Hi Pedro,
So I guess you didn't get to the REALLY LONG STRAIGHT...
And I mean LOOOOONG.
Just for everyones benefit,
Lets see, a medium right hander (probably doing 80km/hr), hold the foot to the floor, go up through all your gears (we have 5), sit the engine just under the limiter in top gear (just under 7000rpm),
AND hang on for around 5 minutes.
Thats about 220km/hr on dirt for us, with a toyota/lexus 4litre V8.
Those big boys I believe can run to 250km/hr :eek:
But then we tore the centre out of the clutch...
https://www.aulro.com/afvb/images/imported/2008/05/411.jpg
p38arover
7th May 2008, 06:55 PM
Just like his own private forum here in the Parking Lot isn't :D:D:D
:D:lol2::lol2::Rolling:
:wasntme:
abaddonxi
8th May 2008, 09:07 AM
Just like his own private forum here in the Parking Lot isn't :D:D:D
It's very dark in here.:p
Cheers
Simon
Pedro_The_Swift
8th May 2008, 09:11 AM
:D:lol2::lol2::Rolling:
:wasntme:
It's very dark in here.:p
Cheers
Simon
OY!:mad:
:p to the pair of ya's
Pedro_The_Swift
8th May 2008, 09:15 AM
https://www.aulro.com/afvb/images/imported/2008/05/411.jpg
The trick here is to use a 12" spring steel wood cutting blade as the centre.
you need to use a water cutting profiler,, then just reattach puks.
bullett proof.:D
Powered by vBulletin® Version 4.2.4 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.