View Full Version : Fitting a water pump
kwosie
28th May 2008, 03:15 PM
Hi all
Just a quick question, I am about to fit a new water pump to my Disco a 95 TDI.
Will the gasket supplied be suffient to ensure no leaks or should I be using an extra sealer with the gasket.
BigJon
28th May 2008, 03:22 PM
I would use a smear of gasket goo on the gasket.
sumo
28th May 2008, 07:16 PM
Hi all
Just a quick question, I am about to fit a new water pump to my Disco a 95 TDI.
Will the gasket supplied be suffient to ensure no leaks or should I be using an extra sealer with the gasket.
I would just give it a light smear of goo, But more importantly replace the p gasket as well because you loosen off three bolts that hold tension against that inside housing when you remove the water pump.
Cheers Sumo:D
Powered by vBulletin® Version 4.2.4 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.