PDA

View Full Version : Radio Wiring 95 Disco Model


AussieLandRover
30th July 2008, 07:38 PM
I need to know the wiring for the radio so I can put in my MP3 CD Player on the weekend can anyone help as I could not find this on the CD Manual.
Boxer
30th July 2008, 07:48 PM
I need to know the wiring for the radio so I can put in my MP3 CD Player on the weekend can anyone help as I could not find this on the CD Manual.

Forget the workshop manual, I looked though all the workshop manuals I could find and found nothing. Then luckily, I had a quick look at the Eurovox website and they had a stack of pin-out diagrams.
Boxer
30th July 2008, 07:50 PM
Try this

FUNCTION STANDARD
ACCESSORY + 12V RED
BATTERY +12V PINK
DIMMER IN + 12V ORANGE
GROUND BLACK
ANT +12V OUTPUT GREY
FRONT LEFT + GREEN
FRONT LEFT - GREEN/BLACK
FRONT RIGHT+ WHITE
FRONT RIGHT- WHITE/BLACK
REAR LEFT+ BLUE
REAR LEFT- BLUE/BLACK
REAR RIGHT+ YELLOW
REAR RIGHT- YELLOW/BLACK
AMP TRIGGER YELLOW
PHONE MUTE PURPLE
AussieLandRover
30th July 2008, 07:54 PM
Try this

FUNCTION STANDARD
ACCESSORY + 12V RED
BATTERY +12V PINK
DIMMER IN + 12V ORANGE
GROUND BLACK
ANT +12V OUTPUT GREY
FRONT LEFT + GREEN
FRONT LEFT - GREEN/BLACK
FRONT RIGHT+ WHITE
FRONT RIGHT- WHITE/BLACK
REAR LEFT+ BLUE
REAR LEFT- BLUE/BLACK
REAR RIGHT+ YELLOW
REAR RIGHT- YELLOW/BLACK
AMP TRIGGER YELLOW
PHONE MUTE PURPLE

Thanks Boxer might even do it sooner now :D
Boxer
30th July 2008, 08:03 PM
Do it! I put a Bluetooth MP3 player in my Disco and it's great, even with the factory speakers.

Don't forget to "thanks" me :) hehe
AussieLandRover
30th July 2008, 08:04 PM
The "Dimmer In :- +12v Orange" now I won't need this anymore will I nor the "Antenna :- +12v Grey" as I don't have a power antenna. Am I right.

I am installing a Panasonic MP3 CD Player with remote.
Boxer
30th July 2008, 08:59 PM
The "Dimmer In :- +12v Orange" now I won't need this anymore will I nor the "Antenna :- +12v Grey" as I don't have a power antenna. Am I right.

I am installing a Panasonic MP3 CD Player with remote.


Exactly, same deal as mine. They're just bonus wires :)
langy
30th July 2008, 09:08 PM
Section E6 of the ETM covers the wiring diagram from the LR plug ( Euro connection) to the rest of the car. The adaptor harness for the Australian Eurovox is the bit covered by the eurovox website. For other people with MA series Discos - if you want to put another brand radio/cd/mps player in the car, AERPRO make adaptor harnesses so you can plug the new radio straight in.
AussieLandRover
30th July 2008, 09:16 PM
Section E6 of the ETM covers the wiring diagram from the LR plug ( Euro connection) to the rest of the car. The adaptor harness for the Australian Eurovox is the bit covered by the eurovox website. For other people with MA series Discos - if you want to put another brand radio/cd/mps player in the car, AERPRO make adaptor harnesses so you can plug the new radio straight in.

With AERPRO it's only with players that are about a year old if you have one that is older then you have to go with the plug that will connect to your land rover but have exposed wires for manual wiring to the player.
loanrangie
30th July 2008, 10:42 PM
With AERPRO it's only with players that are about a year old if you have one that is older then you have to go with the plug that will connect to your land rover but have exposed wires for manual wiring to the player.

Not so, i got an Aerpro loom to fit a 7 year old jvc head unit to my disco, 2 mins and the jobs done.
AussieLandRover
3rd August 2008, 10:10 PM
Ok I now have my Panasonic MP3 player installed and yes the sound is better but still not right I will have to upgrade all the speakers and then all should be right.

Has anyone put 6x9 speakers in the rear of the Disco ?

What are the standard speakers sizes in a 95 Disco ?
Tombie
3rd August 2008, 10:41 PM
Ok I now have my Panasonic MP3 player installed and yes the sound is better but still not right I will have to upgrade all the speakers and then all should be right.

Has anyone put 6x9 speakers in the rear of the Disco ? No

What are the standard speakers sizes in a 95 Disco ? 4"

Hope that helps...
mud13s
4th August 2008, 09:22 PM
I had 6x9s where the factory rear speakers go,

Drilled out the rivets holding the original metal frame in and put a bit of checker plate behind the trim screwed into the body.

Then had a 40mm spacer screwed through the trim into the aluminium,

Was a bit of messing around as the angles/shapes were funny but sounded good in the end.

I don't think I have any pictures and the truck is now dead but I will have a look.