Wabco ABS module

[Disco_owner]

Spent most of the morning pulling the passenger seat "off" and carpet pulled out to attend to a not too seriours "Rust" problem on the floor of Rangie on the passenger side , anyhow The WABCO ABS module under the seat isn't used for anything as ABS on Rangie is in-operative , so question is , can I just unplug it ? The Relay panel and fuses etc ?

Also Can I Disable the Intertia switch?

[dungarover]

Yes there's no ill-effect. I drowned mine in Aquarangie and it stopped working, pulled it apart and dried it out. had it tested and it didn't work, so I never botherd fitting it again :)

Trav

[Disco_owner]

Thanks heaps Trav;

what about the intgertia switch , can I just unplug it ?

[dungarover]

No dont dsconnect that, the rangie won't function but you could probably bypass it if you're handy with the electrical side of things. I just unplugged the ECU and left the rest there. I put a plastic bag over the ECU plug for the ABS brakes so it wouldn't get too grubby 9idin't help, drowned it anyway a few times after that).

Trav

[Disco_owner]

I Know what you mean about things getting grubby :D
spent a good part of morning vaccuming all the cr@p out
from underneath the passenger seat next to and around the ABS
module , and cutting back rust ,putting the seat back on was a
friggin challenge too:mad::D