PDA

View Full Version : B-A-S Remap interface



B-A-S
5th September 2008, 07:20 AM
New BAS Re-map programming interface is designed to give you the customer full control over your remap !!

BAS Re-Map Interface £645+Shipping ,
17.5% VAT will be added to any EU sales


Ideal for the LandRover Defender Puma 2.4TDCI and many more in the Land Rover range.
Giving you the capability to program / remap your car your self from standard to tuned and vise verser as you wish and as many times as you wish.
Built into the remapping tool is also a basic engine diagnostic fault code reader, it will read and erase the engine fault codes you may or may not have in your engine management system.

This is particularly handy if you are going on a Land Rover overland adventure and want to take some backup diagnostic tools.



You the customer will be able to choose when ever you wish out of the maps provided and program the car accordingly wether it be back to standard for a dealer visit or leaving it in tuned state for a day out off roading.

The unit is yours to keep for ever after you have paid for it and is dedicated to your car personally so you know you are getting a personal performance remap download.

Step 1 : Order B-A-S map switching programming module and receive it in the post.
Step 2 : With the software provided installed on your PC you will choose your car make and model from the list in the software. Link for download
Step 3 : Program the B A S switching programming module with your car choice.
Step 4 : Remove module from PC and connect to the car OBD Diagnostic port ,

Make your selection to read the ECU from the list and you will be prompted to press Y to read the ecu.
Step 5 : Re connect the B-A-S switching programming module with your PC and download the file.
Step 6 : Email/Upload me the file for tuning and modification making sure you tell me the full cars details and intended use.
Step 7 : Upload the tuned file i send you back to the B-A-S switching programming module with the PC's software.
Now the B A S switching programming module will have 2 files inside it, STD & TUNED.
Step 8 : Connect to your car and program modified tuned file.


Once the B A S switching programming module is programmed with the relevent Standard & Tunde re map files for your car there is no longer a use for your PC and the software.
You can change between maps as many times as you wish in the future.

This tool is available for Many models here are just some in the LandRover range :

Defender 2.4TDCI
Discovery 2.7TDV6
RangeRover 3.0L TD6
RangeRover 3.6TDV8
RangeRover Sport 2.7TDV6
RangeRover Sport 3.6TDV8
Freelander 2.0L TD4
Freelander 2 2.2TDI



For more information and the relevent software please
download instruction PDF File!

http://www.bellautoservices.co.uk/pdf/bas-290.pdf