Speedo cable

[agrojnr]

Guys can you please help me:(

I need to fit the speedo cable back in but have lost some parts somewhere so can anyone tell me whats missing and where I can sorce the parts.

I have attached pics of what is there now

https://www.aulro.com/afvb/images/imported/2008/09/450.jpg

https://www.aulro.com/afvb/images/imported/2008/09/451.jpg
End of cable

https://www.aulro.com/afvb/images/imported/2008/09/452.jpg
Side view

Its off a 63 IIA and my parts manual does'nt show these bits

Adam

[JohnR]

It looks like it might have a mechanical ratio drive box installed to compensate for a change in the drive chain somewhere. If you want to give me a call tomorrow during the day (Qld time) I might be able to talk you through what you need.

07 3277 3888

Cheers,

[isuzurover]

I have never seen one like that, SII/IIA or SIII.

The above post may be correct. The standard speedo cable just terminates in a square drive, with a 3-hole flange which screws to the t-case.

[Aaron IIA]

Buy a quality new complete cable. They are available for about $30.

Aaron.

[JDNSW]

I wonder if it is a ratio adaptor for mph-kph?

Also, I would check that you have the standard 4.7 ratio diffs - a change here would be another reason for fitting an adaptor.

John

[agrojnr]

No my diffs are not standard (rangie I think) and also aftermarket 6 fitted as well.

I spoke to John and I will get some measurements together to make the pin that I am missing.


Adam