View Full Version : Help for Graz please
LandyAndy
7th October 2008, 07:18 PM
Hi Guys
Graz is up in Kalbarri holidaying it.
Sent me a text message.
"Loud bang when reversing up slope.Jacking cant find prob in diffs or CV.Otherwise drives normal."
Vehicle is a TD5 130,manual.
Ideas please,I will try and call him back with your inputs.
Thanks
Andrew
V8Landy
7th October 2008, 07:24 PM
May of ran over a BIG M carton:wasntme:
LandyAndy
7th October 2008, 07:38 PM
I missed typing a part of his text,it was "loud bang and shudder".
Perhaps it was a Landcruiser,not BigM carton:D:D:D:D:D
Andrew
TimNZ
7th October 2008, 07:45 PM
Hi Andrew, Was it from the front/center/rear of the vehicle? Could be a crown wheel or CV?? Or possibly a handbrake shoe sticking since he was going in reverse, (just a random guess since the vehicle is now driving fine)?? Can he drain his diff oils and check?
Tim
Blknight.aus
7th October 2008, 08:07 PM
ID be thinking along the lines of a spline jump on a shaft or tooth off of a diff part somewhere...
The handbrake can release with a crack if its been applied hard after its been dragging and then allowed to cool. The contraction of the drum will hold the shoes untill the drum is turned enough to kick the shoes back. But that doesnt account for the shudder.
LRHybrid100
7th October 2008, 08:13 PM
hmmm - he doesnt seem too worried, as I have just been talking to him about it (we are on the same caravan park in windy Kalbarri) :D
LRH
LandyAndy
7th October 2008, 08:36 PM
Onya LRH
Can you let him know I posted as he asked and pass the replies on,saves a mobile call.
Make sure he is drinking his fair share of MONKEY BLOOD:cool::cool::cool:
Thanks
Andrew
LRHybrid100
7th October 2008, 09:33 PM
NWS - I was checking out his D130 with the new tray and pod he's building this arvo, then realised it was the Graz vehicle once I saw the fuel filler neck!!!
LRH
CraigE
9th October 2008, 03:03 AM
I would say it was the handbrake stuck on.
Remember I had the same thing about this time last year. Loud bang and shudder, sounding like metal breaking. I was sure I had at least done an axle minimum. Cars near by heard as well. Spent a fair bit of time looking for what was broken and found nothing. Checked axles, diffs, uni joints, gearbox etc.
For some reason dont have Graz's number in my phone. Just text him handbrake releasing. Anyway I am nights so would wake him up anyway.
Cheers
CraigE
Graz
13th October 2008, 11:07 AM
Hi
I'm back and strapped in at the work station
Thanks for the replys
Since the one occurance it has been ops normal so as suggested it may have been the handbrake ( although she wasn't in the left seat at the time :D:D:D) or as suggested in LandyAndy's text the CDL. I did note that while selecting transfer box neutral the lever was somewhere between lock and unlocked. I may have an issue here as there is not any detent, unlike my Disco, although the locked light goes on and off as expected.
Cheers
Powered by vBulletin® Version 4.2.4 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.