Wiring in to Disco 2?

[Shaker]

Is there a preferred way of getting wires & cables through the firewall & in to the cabin on Disco TD5?
With the firewall covered in soundproofing there is no obvious visible way.

[pohm66]

Had the same question the other day Shaker when I was wiring in the driving lights...

If you fold back the sound proofing behind the Brake Servo there 2 large rubber grommet / plugs there. I pierced these to feed the cabling through....

Hope this helps.......

[Redback]

Also on the passenger side you gain entry near the Inersia switch.

EDIT wrong info now fixed

Baz.

[Shaker]

Thank you!

[Utemad]

Had the same question the other day Shaker when I was wiring in the driving lights...

If you fold back the sound proofing behind the Brake Servo there 2 large rubber grommet / plugs there. I pierced these to feed the cabling through....

Hope this helps.......


We used these in my mate's Td5. Bloody tight to access but we got there.

[Franz]

Is there a preferred way of getting wires & cables through the firewall & in to the cabin on Disco TD5?
With the firewall covered in soundproofing there is no obvious visible way.
I just followed existing wiring through the firewall and in the process found a few blanks.

Cheers,

Franz