PDA

View Full Version : Fittings on SLS comp



Pedro_The_Swift
27th December 2008, 09:55 AM
Are the two plastic hoses a push-in type fitting?
one at the front, the other is a swivel,,


its sort of hanging off atm,,, ;)

sniegy
27th December 2008, 10:12 AM
Yes Pedro,
They are both push in type connections. Just push home resonably firm. To remove just push the ring (Black on the top connection & Silver on the front connection)down into the unit & the hoses will come loose.
Cheers

Pedro_The_Swift
27th December 2008, 10:14 AM
:BigThumb::clap2::banana:

Pedro_The_Swift
27th December 2008, 10:25 AM
eeeeuwwww!!!

just had a puddle of brown SMELLY water(?) pour out of the old one,,,:o:o


when was the last time I drove through a brown smelly river??:p

Pedro_The_Swift
27th December 2008, 11:09 AM
Ok,, its all back in and connected ,,
except for the two small airlines that go to the bags,,
these were snipped off at the screw in fitting,,

will these be a olive compression type fitting?

Pedro_The_Swift
27th December 2008, 11:20 AM
good news is yes they are--:angel:

bad news is the lines are now too short,,:D:D
(but I sort of figured that)




looks like its wait till monday,,,,

have also pulled the 30 amp fuse-:eek: